Choose Your Country or Region

research use only

Alpelisib (BYL719) PI3Kα inhibitor

Cat.No.S2814

Alpelisib (BYL719) is a potent and selective PI3Kα inhibitor with IC50 of 5 nM in a cell-free assay, and minimal effect on PI3Kβ/γ/δ. This compound is in Phase 2.

Alpelisib (BYL719) PI3K inhibitor Chemical Structure

Chemical Structure

Molecular Weight: 441.47

Jump to

Quality Control

Batch: Purity: 99.96%

99.96

Related Targets	Akt mTOR GSK-3 ATM/ATR DNA-PK AMPK PDPK1 PTEN PP2A PDK
Other PI3K Inhibitors	GDC-0077 (Inavolisib) SAR405 Quercetin (Sophoretin) LY294002 XL147 analogue Tersolisib (STX-478) Buparlisib (BKM120) 740 Y-P (PDGFR 740Y-P) GO-203 TFA Eganelisib (IPI-549)

Q&A of Alpelisib (BYL719): Insights Rooted in Extensive Publications, Every Answer Cited

AI is thinking... 0%

Solubility in DMSO or Water

In vitro
Batch:

DMSO : 88 mg/mL (199.33 mM)
(Moisture-contaminated DMSO may reduce solubility. Use fresh, anhydrous DMSO.)

Water : Insoluble

Ethanol : Insoluble

The solubility data above are all experimental results (not literature values).

DMSO : 88 mg/mL (199.33 mM)
(Moisture-contaminated DMSO may reduce solubility. Use fresh, anhydrous DMSO.)

Ethanol : 2 mg/mL

Water : Insoluble

The solubility data above are all experimental results (not literature values).

DMSO : 88 mg/mL (199.33 mM)
(Moisture-contaminated DMSO may reduce solubility. Use fresh, anhydrous DMSO.)

Ethanol : 2 mg/mL

Water : Insoluble

The solubility data above are all experimental results (not literature values).

DMSO : 88 mg/mL (199.33 mM)
(Moisture-contaminated DMSO may reduce solubility. Use fresh, anhydrous DMSO.)

Water : Insoluble

Ethanol : Insoluble

The solubility data above are all experimental results (not literature values).

DMSO : 88 mg/mL (199.33 mM)
(Moisture-contaminated DMSO may reduce solubility. Use fresh, anhydrous DMSO.)

Ethanol : 59 mg/mL

Water : Insoluble

The solubility data above are all experimental results (not literature values).

Molarity Calculator

Mass	Concentration	Volume	Molecular Weight
Mass value Mass unit	Concentration value Concentration unit	Volume value Volume unit	Molecular weight (g/mol)

Dilution Calculator Molecular Weight Calculator

In vivo batch selection In vivo Batch:
Homogeneous suspension	CMC-NA	≥5mg/ml	Taking the 1 mL working solution as an example, add 5 mg of this product to 1 ml of CMC-Na solution, mix evenly to obtain a homogeneous suspension with a final concentration of 5 mg/ml.
Clear solution	5%DMSO 1 40%PEG300 2 5%Tween80 3 50%ddH2O Validated by Selleck labs. Should you need adjustments to this formulation, contact our sales team for custom testing.	5.000mg/ml (11.33mM)	Taking the 1 mL working solution as an example, add 50 μL of 100 mg/ml clarified DMSO stock solution to 400 μL of PEG300, mix evenly to clarify it; add 50 μL of Tween80 to the above system, mix evenly to clarify; then continue to add 500 μL of ddH2O to adjust the volume to 1 mL. The mixed solution should be used immediately for optimal results.
Homogeneous suspension	CMC-NA	≥5mg/ml	Taking the 1 mL working solution as an example, add 5 mg of this product to 1 ml of CMC-Na solution, mix evenly to obtain a homogeneous suspension with a final concentration of 5 mg/ml.
Homogeneous suspension	CMC-NA	≥5mg/ml	Taking the 1 mL working solution as an example, add 5 mg of this product to 1 ml of CMC-Na solution, mix evenly to obtain a homogeneous suspension with a final concentration of 5 mg/ml.
Homogeneous suspension	CMC-NA	≥5mg/ml	Taking the 1 mL working solution as an example, add 5 mg of this product to 1 ml of CMC-Na solution, mix evenly to obtain a homogeneous suspension with a final concentration of 5 mg/ml.
Clear solution	5%DMSO 1 40%PEG300 2 5%Tween80 3 50%ddH2O Validated by Selleck labs. Should you need adjustments to this formulation, contact our sales team for custom testing.	4.400mg/ml (9.97mM)	Taking the 1 mL working solution as an example, add 50 μL 88 mg/ml clarified DMSO stock solution to 400 μL PEG300, mix evenly to clarify it; add 50 μL Tween80 to the above system, mix evenly to clarify it; then continue to add 500 μL ddH2O to adjust the volume to 1 mL. The mixed solution should be used immediately for optimal results.
Homogeneous suspension	CMC-NA	≥5mg/ml	Taking the 1 mL working solution as an example, add 5 mg of this product to 1 ml of CMC-Na solution, mix evenly to obtain a homogeneous suspension with a final concentration of 5 mg/ml.

In vivo Formulation Calculator (Clear solution)

Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)

Dosage: mg/kg

Average weight of animals: g

Dosing volume per animal: μL

Number of animals:

Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)

% DMSO

%

% Tween 80

% ddH₂O

% DMSO

+

%

Calculation results:

Working concentration: mg/ml;

Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )

Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH₂O, mix and clarify.

Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.

Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such
as vortex, ultrasound or hot water bath can be used to aid dissolving.

Read more about Alpelisib (BYL719) solubility in DMSO or water

Search directly for a cell line, or select a cell line to find matched working concentrations

Read more about Alpelisib (BYL719) working concentrations for cell culture treatment

Alpelisib (BYL719) is a potent inhibitor of PIK3CA (~5 nM), PIK3CG (~250 nM), PIK3CD (~290 nM), PIK3CB (~1200 nM), mTOR (>10 μM), and PI 4-kinase b (0.5 mM). Alpelisib (BYL719) exhibits the greatest inhibitory potency toward PIK3CA (IC50 = ~5 nM).

Read more about selectivity & specificity

Mechanism of Action

Information	Alpelisib (BYL719) is a potent, selective PI3Kα inhibitor. It affects PI3K/AKT/mTOR signaling by inhibiting PI3K activity and inducing p110α degradation, effectively suppressing cancer cell proliferation and inducing apoptosis.
Read more about Alpelisib (BYL719) IC50 for cell-based and cell-free assays
Primary Applications and Mechanism of Action

Read more about Alpelisib (BYL719) Mechanism of Action

Chemical Information, Storage & Stability

Molecular Weight	441.47	Formula	C₁₉H₂₂F₃N₅O₂S	Storage (From the date of receipt)	3 years-20°Cpowder
CAS No.	1217486-61-7	Download SDF		Storage of Stock Solutions	1 year-80°Cin solvent 1 month-20°Cin solvent
Synonyms	N/A			Smiles	CC1=C(SC(=N1)NC(=O)N2CCCC2C(=O)N)C3=CC(=NC=C3)C(C)(C)C(F)(F)F

Read more about storage & stability

Read more comparative analysis about Alpelisib (BYL719)

Tech Support

Handling Instructions

Tel: +1-832-582-8158 Ext:3

If you have any other enquiries, please leave a message.

Dilution Calculator

Calculate the dilution required to prepare a stock solution. The Selleck dilution calculator is based on the following equation:

Concentration _(start) x Volume _(start) = Concentration _(final) x Volume _(final)

This equation is commonly abbreviated as: C1V1 = C2V2 ( Input Output )

*When preparing stock solutions always use the batch-specific molecular weight of the product found on the vial label and MSDS / COA (available online).

The Serial Dilution Calculator Equation

Serial Dilutions

Concentration (start):

Dilution-folds:

Computed Result

C1=C0/X	C1:		LOG(C1):
C2=C1/X	C2:		LOG(C2):
C3=C2/X	C3:		LOG(C3):
C4=C3/X	C4:		LOG(C4):
C5=C4/X	C5:		LOG(C5):
C6=C5/X	C6:		LOG(C6):
C7=C6/X	C7:		LOG(C7):
C8=C7/X	C8:		LOG(C8):