Choose Your Country or Region

research use only

Nutlin-3a MDM2 inhibitor

Cat.No.S8059

Nutlin-3a ((-)-Nutlin-3), the active enantiomer of Nutlin-3, inhibits the p53/MDM2 interaction with IC50 of 90 nM in a cell-free assay. Nutlin-3a induces autophagy and apoptosis in a p53-dependent manner.

Nutlin-3a MDM2/MDMX inhibitor Chemical Structure

Chemical Structure

Molecular Weight: 581.49

Quality Control

Batch: Purity: 99.79%

99.79

Related Targets	Bcl-2 Caspase PD-1/PD-L1 Ferroptosis p53 Apoptosis related Synthetic Lethality STAT TNF-alpha Ras
Other MDM2/MDMX Inhibitors	Nutlin-3 RG-7112 Brigimadlin Idasanutlin (RG7388) SAR405838 NSC 207895 NVP-CGM097 Siremadlin (HDM201) Nutlin-3b YH239-EE

Solubility in DMSO or Water

In vitro
Batch:

DMSO : 100 mg/mL (171.97 mM)
(Moisture-contaminated DMSO may reduce solubility. Use fresh, anhydrous DMSO.)

Ethanol : 100 mg/mL

Water : Insoluble

The solubility data above are all experimental results (not literature values).

DMSO : 100 mg/mL (171.97 mM)
(Moisture-contaminated DMSO may reduce solubility. Use fresh, anhydrous DMSO.)

Ethanol : 100 mg/mL

Water : Insoluble

The solubility data above are all experimental results (not literature values).

DMSO : 100 mg/mL (171.97 mM)
(Moisture-contaminated DMSO may reduce solubility. Use fresh, anhydrous DMSO.)

Ethanol : 100 mg/mL

Water : Insoluble

The solubility data above are all experimental results (not literature values).

DMSO : 100 mg/mL (171.97 mM)
(Moisture-contaminated DMSO may reduce solubility. Use fresh, anhydrous DMSO.)

Ethanol : 100 mg/mL

Water : Insoluble

The solubility data above are all experimental results (not literature values).

DMSO : 100 mg/mL (171.97 mM)
(Moisture-contaminated DMSO may reduce solubility. Use fresh, anhydrous DMSO.)

Ethanol : 100 mg/mL

Water : Insoluble

The solubility data above are all experimental results (not literature values).

Molarity Calculator

Mass	Concentration	Volume	Molecular Weight
Mass value Mass unit	Concentration value Concentration unit	Volume value Volume unit	Molecular weight (g/mol)

Dilution Calculator Molecular Weight Calculator

In vivo batch selection In vivo Batch:
Homogeneous suspension	CMC-NA	≥5mg/ml	Taking the 1 mL working solution as an example, add 5 mg of this product to 1 ml of CMC-Na solution, mix evenly to obtain a homogeneous suspension with a final concentration of 5 mg/ml.
Homogeneous suspension	CMC-NA	≥5mg/ml	Taking the 1 mL working solution as an example, add 5 mg of this product to 1 ml of CMC-Na solution, mix evenly to obtain a homogeneous suspension with a final concentration of 5 mg/ml.
Homogeneous suspension	CMC-NA	≥5mg/ml	Taking the 1 mL working solution as an example, add 5 mg of this product to 1 ml of CMC-Na solution, mix evenly to obtain a homogeneous suspension with a final concentration of 5 mg/ml.
Homogeneous suspension	CMC-NA	≥5mg/ml	Taking the 1 mL working solution as an example, add 5 mg of this product to 1 ml of CMC-Na solution, mix evenly to obtain a homogeneous suspension with a final concentration of 5 mg/ml.
Homogeneous suspension	CMC-NA	≥5mg/ml	Taking the 1 mL working solution as an example, add 5 mg of this product to 1 ml of CMC-Na solution, mix evenly to obtain a homogeneous suspension with a final concentration of 5 mg/ml.
Clear solution	5%DMSO 1 40%PEG300 2 5%Tween80 3 50%ddH2O Validated by Selleck labs. Should you need adjustments to this formulation, contact our sales team for custom testing.	10.000mg/ml (17.20mM)	Taking the 1 mL working solution as an example, add 50 μL of 200 mg/ml clarified DMSO stock solution to 400 μL of PEG300, mix evenly to clarify it; add 50 μL of Tween80 to the above system, mix evenly to make it clear; then continue to add 500 μL of ddH2O to adjust the volume to 1 mL. The mixed solution should be used immediately for optimal results.

In vivo Formulation Calculator (Clear solution)

Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)

Dosage: mg/kg

Average weight of animals: g

Dosing volume per animal: μL

Number of animals:

Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)

% DMSO

%

% Tween 80

% ddH₂O

% DMSO

+

%

Calculation results:

Working concentration: mg/ml;

Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )

Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH₂O, mix and clarify.

Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.

Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such
as vortex, ultrasound or hot water bath can be used to aid dissolving.

Read more about Nutlin-3a solubility in DMSO or water

Working Concentrations for Cell Culture Treatment

Read more about Nutlin-3a working concentrations for cell culture treatment

Working Concentrations for Animal Model Treatment

Mechanism of Action

Information	Nutlin-3a is a potent and selective MDM2 inhibitor. It affects p53 signaling by binding to the p53-binding pocket of MDM2 to disrupt the MDM2-p53 interaction, promoting p53 stabilization, cell cycle arrest, and apoptosis in cancer cells.
Read more about Nutlin-3a IC50 for cell-based and cell-free assays
Primary Applications and Mechanism of Action

Read more about Nutlin-3a Mechanism of Action

Chemical Information, Storage & Stability

Molecular Weight	581.49	Formula	C₃₀H₃₀Cl₂N₄O₄	Storage (From the date of receipt)	3 years-20°Cpowder
CAS No.	675576-98-4	--		Storage of Stock Solutions	1 year-80°Cin solvent 1 month-20°Cin solvent
Synonyms	(-)-Nutlin-3			Smiles	CC(C)OC1=C(C=CC(=C1)OC)C2=NC(C(N2C(=O)N3CCNC(=O)C3)C4=CC=C(C=C4)Cl)C5=CC=C(C=C5)Cl

Read more about storage & stability

Read more comparative analysis about Nutlin-3a

Tech Support

Handling Instructions

Tel: +1-832-582-8158 Ext:3

If you have any other enquiries, please leave a message.

Frequently Asked Questions

Question 1:
What is the difference between S1061 (Nutlin-3) and it?

Answer:
S1061 is a racemic mixture of Nutlin3a and Nutlin3b. Its active enantiomer is s8059.

Dilution Calculator

Calculate the dilution required to prepare a stock solution. The Selleck dilution calculator is based on the following equation:

Concentration _(start) x Volume _(start) = Concentration _(final) x Volume _(final)

This equation is commonly abbreviated as: C1V1 = C2V2 ( Input Output )

*When preparing stock solutions always use the batch-specific molecular weight of the product found on the vial label and MSDS / COA (available online).

The Serial Dilution Calculator Equation

Serial Dilutions

Concentration (start):

Dilution-folds:

Computed Result

C1=C0/X	C1:		LOG(C1):
C2=C1/X	C2:		LOG(C2):
C3=C2/X	C3:		LOG(C3):
C4=C3/X	C4:		LOG(C4):
C5=C4/X	C5:		LOG(C5):
C6=C5/X	C6:		LOG(C6):
C7=C6/X	C7:		LOG(C7):
C8=C7/X	C8:		LOG(C8):