Choose Your Country or Region

research use only

Vorinostat (SAHA) HDAC inhibitor

Cat.No.S1047

Vorinostat (SAHA) is an HDAC inhibitor with IC50 of ~10 nM in a cell-free assay and abrogates productive HPV-18 DNA amplification.

Vorinostat (SAHA) HDAC inhibitor Chemical Structure

Chemical Structure

Molecular Weight: 264.3

Jump to

Quality Control

Batch: Purity: 99.96%

99.96

Related Targets	JAK BET Histone Methyltransferase PKC PARP HIF PRMT EZH2 AMPK Sirtuin
Other HDAC Inhibitors	ITF-2357 (Givinostat) Hydrochloride Monohydrate Fimepinostat (CUDC-907) Trichostatin A (TSA) Entinostat (MS-275) RGFP966 Quisinostat (JNJ-26481585) Dihydrochloride Tubastatin A Hydrochloride Tubastatin A Mocetinostat (MGCD0103) Ricolinostat (ACY-1215)

Solubility in DMSO or Water

In vitro
Batch:

DMSO : 52 mg/mL (196.74 mM)
(Moisture-contaminated DMSO may reduce solubility. Use fresh, anhydrous DMSO.)

Ethanol : 6.5 mg/mL

Water : Insoluble

The solubility data above are all experimental results (not literature values).

DMSO : 53 mg/mL (200.52 mM)
(Moisture-contaminated DMSO may reduce solubility. Use fresh, anhydrous DMSO.)

Ethanol : 18 mg/mL

Water : Insoluble

The solubility data above are all experimental results (not literature values).

DMSO : 53 mg/mL (200.52 mM)
(Moisture-contaminated DMSO may reduce solubility. Use fresh, anhydrous DMSO.)

Ethanol : 2 mg/mL

Water : Insoluble

The solubility data above are all experimental results (not literature values).

DMSO : 53 mg/mL (200.52 mM)
(Moisture-contaminated DMSO may reduce solubility. Use fresh, anhydrous DMSO.)

Ethanol : 4 mg/mL

Water : Insoluble

The solubility data above are all experimental results (not literature values).

DMSO : 53 mg/mL (200.52 mM)
(Moisture-contaminated DMSO may reduce solubility. Use fresh, anhydrous DMSO.)

Ethanol : 2 mg/mL

Water : Insoluble

The solubility data above are all experimental results (not literature values).

Molarity Calculator

Mass	Concentration	Volume	Molecular Weight
Mass value Mass unit	Concentration value Concentration unit	Volume value Volume unit	Molecular weight (g/mol)

Dilution Calculator Molecular Weight Calculator

In vivo batch selection In vivo Batch:
Homogeneous suspension	CMC-NA	≥5mg/ml	Taking the 1 mL working solution as an example, add 5 mg of this product to 1 ml of CMC-Na solution, mix evenly to obtain a homogeneous suspension with a final concentration of 5 mg/ml.
Homogeneous suspension	CMC-NA	≥5mg/ml	Taking the 1 mL working solution as an example, add 5 mg of this product to 1 ml of CMC-Na solution, mix evenly to obtain a homogeneous suspension with a final concentration of 5 mg/ml.
Clear solution	5%DMSO 1 Corn oil Validated by Selleck labs. Should you need adjustments to this formulation, contact our sales team for custom testing.	2.500mg/ml (9.46mM)	Taking the 1 mL working solution as an example, add 50 μL of 50 mg/ml clear DMSO stock solution to 950 μL of corn oil and mix evenly. The mixed solution should be used immediately for optimal results.
Homogeneous suspension	CMC-NA	≥5mg/ml	Taking the 1 mL working solution as an example, add 5 mg of this product to 1 ml of CMC-Na solution, mix evenly to obtain a homogeneous suspension with a final concentration of 5 mg/ml.
Homogeneous suspension	CMC-NA	≥5mg/ml	Taking the 1 mL working solution as an example, add 5 mg of this product to 1 ml of CMC-Na solution, mix evenly to obtain a homogeneous suspension with a final concentration of 5 mg/ml.
Homogeneous suspension	CMC-NA	≥5mg/ml	Taking the 1 mL working solution as an example, add 5 mg of this product to 1 ml of CMC-Na solution, mix evenly to obtain a homogeneous suspension with a final concentration of 5 mg/ml.

In vivo Formulation Calculator (Clear solution)

Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)

Dosage: mg/kg

Average weight of animals: g

Dosing volume per animal: μL

Number of animals:

Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)

% DMSO

%

% Tween 80

% ddH₂O

% DMSO

+

%

Calculation results:

Working concentration: mg/ml;

Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )

Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH₂O, mix and clarify.

Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.

Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such
as vortex, ultrasound or hot water bath can be used to aid dissolving.

Read more about Vorinostat (SAHA) solubility in DMSO or water

Working Concentrations for Cell Culture Treatment

Read more about Vorinostat (SAHA) working concentrations for cell culture treatment

Working Concentrations for Animal Model Treatment

Mechanism of Action

Information	Vorinostat is a potent, reversible pan-HDAC inhibitor. It affects Akt/mTOR signaling by chelating zinc, promoting apoptosis.
Read more about Vorinostat (SAHA) IC50 for cell-based and cell-free assays
Primary Applications and Mechanism of Action

Read more about Vorinostat (SAHA) Mechanism of Action

Chemical Information, Storage & Stability

Molecular Weight	264.3	Formula	C₁₄H₂₀N₂O₃	Storage (From the date of receipt)	powder, 2 years at 4°C (in the dark); 10mM (1mL in DMSO), 1 year at -20°C (in the dark)
CAS No.	149647-78-9	Download SDF		Storage of Stock Solutions	1 year-80°Cin solvent 1 month-20°Cin solvent
Synonyms	MK0683, Suberoylanilide hydroxamic acid			Smiles	C1=CC=C(C=C1)NC(=O)CCCCCCC(=O)NO

Read more about storage & stability

Read more comparative analysis about Vorinostat (SAHA)

Tech Support

Handling Instructions

Tel: +1-832-582-8158 Ext:3

If you have any other enquiries, please leave a message.

Frequently Asked Questions

Question 1:
What’s the recommendation about its reconstitution for in vivo animal study?

Answer:
We recommend the following vehicle for it: 2% DMSO, 40% PEG 300, 5% Propylene glycol, 1% Tween 80 at 5 mg/mL.

Dilution Calculator

Calculate the dilution required to prepare a stock solution. The Selleck dilution calculator is based on the following equation:

Concentration _(start) x Volume _(start) = Concentration _(final) x Volume _(final)

This equation is commonly abbreviated as: C1V1 = C2V2 ( Input Output )

*When preparing stock solutions always use the batch-specific molecular weight of the product found on the vial label and MSDS / COA (available online).

The Serial Dilution Calculator Equation

Serial Dilutions

Concentration (start):

Dilution-folds:

Computed Result

C1=C0/X	C1:		LOG(C1):
C2=C1/X	C2:		LOG(C2):
C3=C2/X	C3:		LOG(C3):
C4=C3/X	C4:		LOG(C4):
C5=C4/X	C5:		LOG(C5):
C6=C5/X	C6:		LOG(C6):
C7=C6/X	C7:		LOG(C7):
C8=C7/X	C8:		LOG(C8):