Choose Your Country or Region

research use only

Zoldonrasib (RMC-9805) KRAS-G12D inhibitor

Cat.No.E1962

Zoldonrasib (RMC-9805) is an orally active inhibitor of KRAS G12D that inhibits RAS signaling, leading to apoptosis in cancer cells with the KRAS G12D mutation.

Zoldonrasib (RMC-9805) KRas inhibitor Chemical Structure

Chemical Structure

Molecular Weight: 1168.44

Jump to

Quality Control

Batch: Purity: 99.68%

99.68

Related Targets	Bcl-2 Caspase PD-1/PD-L1 Ferroptosis p53 Apoptosis related Synthetic Lethality STAT TNF-alpha Ras
Other KRas Inhibitors	RMC-7977 Daraxonrasib (RMC-6236) MRTX1133 BI-2852 Adagrasib (MRTX849) HRS-4642 ARS-1620 BI-3406 ARS-853 BAY-293

Q&A of Zoldonrasib (RMC-9805): Insights Rooted in Extensive Publications, Every Answer Cited

AI will take about 1 minute to answer this question... 0%

Solubility in DMSO or Water

In vitro
Batch:

DMSO : 100 mg/mL (85.58 mM)
(Moisture-contaminated DMSO may reduce solubility. Use fresh, anhydrous DMSO.)

Ethanol : 100 mg/mL

Water : Insoluble

The solubility data above are all experimental results (not literature values).

DMSO : 100 mg/mL (85.58 mM)
(Moisture-contaminated DMSO may reduce solubility. Use fresh, anhydrous DMSO.)

Ethanol : 100 mg/mL

Water : Insoluble

The solubility data above are all experimental results (not literature values).

DMSO : 100 mg/mL (85.58 mM)
(Moisture-contaminated DMSO may reduce solubility. Use fresh, anhydrous DMSO.)

Ethanol : 100 mg/mL

Water : Insoluble

The solubility data above are all experimental results (not literature values).

DMSO : 100 mg/mL (85.58 mM)
(Moisture-contaminated DMSO may reduce solubility. Use fresh, anhydrous DMSO.)

Ethanol : 100 mg/mL

Water : Insoluble

The solubility data above are all experimental results (not literature values).

DMSO : 100 mg/mL (85.58 mM)
(Moisture-contaminated DMSO may reduce solubility. Use fresh, anhydrous DMSO.)

Ethanol : 100 mg/mL

Water : Insoluble

The solubility data above are all experimental results (not literature values).

Molarity Calculator

Mass	Concentration	Volume	Molecular Weight
Mass value Mass unit	Concentration value Concentration unit	Volume value Volume unit	Molecular weight (g/mol)

Dilution Calculator Molecular Weight Calculator

In vivo batch selection In vivo Batch:
Homogeneous suspension	CMC-NA	≥5mg/ml	Taking the 1 mL working solution as an example, add 5 mg of this product to 1 ml of CMC-Na solution, mix evenly to obtain a homogeneous suspension with a final concentration of 5 mg/ml.
Clear solution	5%DMSO 1 40%PEG300 2 5%Tween80 3 50%ddH2O Validated by Selleck labs. Should you need adjustments to this formulation, contact our sales team for custom testing.	5mg/ml (4.28mM)	Taking the 1 mL working solution as an example, add 50 μL of 100 mg/ml clarified DMSO stock solution to 400 μL of PEG300, mix evenly to clarify it; add 50 μL of Tween80 to the above system, mix evenly to clarify; then continue to add 500 μL of ddH2O to adjust the volume to 1 mL. The mixed solution should be used immediately for optimal results.
Clear solution	5% DMSO 1 95% Corn oil Validated by Selleck labs. Should you need adjustments to this formulation, contact our sales team for custom testing.	0.7mg/ml (0.60mM)	Taking the 1 mL working solution as an example, add 50 μL of 14 mg/ml clear DMSO stock solution to 950 μL of corn oil and mix evenly. The mixed solution should be used immediately for optimal results.

In vivo Formulation Calculator (Clear solution)

Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)

Dosage: mg/kg

Average weight of animals: g

Dosing volume per animal: μL

Number of animals:

Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)

% DMSO

%

% Tween 80

% ddH₂O

% DMSO

+

%

Calculation results:

Working concentration: mg/ml;

Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )

Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH₂O, mix and clarify.

Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.

Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such
as vortex, ultrasound or hot water bath can be used to aid dissolving.

Read more about Zoldonrasib (RMC-9805) solubility in DMSO or water

Mechanism of Action

Information

RMC-9805 is an orally bioavailable, and mutant-selective covalent KRAS G12D (ON) inhibitor. It works by selectively binding to and inhibiting mutant KRAS G12D in its active, GTP-bound state, disrupting downstream oncogenic Ras signaling pathways. This pharmacological intervention effectively induces apoptosis and drives robust tumor regression in preclinical models of KRAS G12D-mutated malignancies.

Primary Applications and Mechanism of Action

Read more about Zoldonrasib (RMC-9805) Mechanism of Action

Chemical Information, Storage & Stability

Molecular Weight	1168.44	Formula	C₆₃H₈₈F₃N₁₁O₇	Storage (From the date of receipt)	3 years-20°Cpowder
CAS No.	2922732-54-3	Download SDF		Storage of Stock Solutions	1 year-80°Cin solvent 1 month-20°Cin solvent

Read more about storage & stability

Zoldonrasib (RMC-9805) VS MRTX1133

Read more comparative analysis about Zoldonrasib (RMC-9805)

Tech Support

Handling Instructions

Tel: +1-832-582-8158 Ext:3

If you have any other enquiries, please leave a message.

Dilution Calculator

Calculate the dilution required to prepare a stock solution. The Selleck dilution calculator is based on the following equation:

Concentration _(start) x Volume _(start) = Concentration _(final) x Volume _(final)

This equation is commonly abbreviated as: C1V1 = C2V2 ( Input Output )

*When preparing stock solutions always use the batch-specific molecular weight of the product found on the vial label and MSDS / COA (available online).

The Serial Dilution Calculator Equation

Serial Dilutions

Concentration (start):

Dilution-folds:

Computed Result

C1=C0/X	C1:		LOG(C1):
C2=C1/X	C2:		LOG(C2):
C3=C2/X	C3:		LOG(C3):
C4=C3/X	C4:		LOG(C4):
C5=C4/X	C5:		LOG(C5):
C6=C5/X	C6:		LOG(C6):
C7=C6/X	C7:		LOG(C7):
C8=C7/X	C8:		LOG(C8):