research use only

BRM/BRG1 ATP Inhibitor-1 (BRM014) BRM/BRG1 ATP inhibitor

Cat.No.E0111

BRM/BRG1 ATP Inhibitor-1 (Compound 14) is an orally active inhibitors of Brahma Homolog (BRM)/SMARCA2 (BRG1) with IC50s below 0.005 µM.

Chemical Structure

Molecular Weight: 318.27

Jump to

Quality Control

Batch: Purity: 99.88%

99.88

Related Targets	HDAC JAK BET Histone Methyltransferase PKC PARP HIF PRMT EZH2 AMPK
Other SMARCA2 Inhibitors	AU-15330 Camibirstat (FHD-286) SGC-SMARCA-BRDVIII FHT-1015

Solubility

In vitro
Batch:

DMSO : 64 mg/mL (201.08 mM)
(Moisture-contaminated DMSO may reduce solubility. Use fresh, anhydrous DMSO.)

Ethanol : 64 mg/mL

Water : Insoluble

Molarity Calculator

Mass	Concentration	Volume	Molecular Weight
Mass value Mass unit	Concentration value Concentration unit	Volume value Volume unit	Molecular weight (g/mol)

Dilution Calculator Molecular Weight Calculator

In vivo batch selection In vivo Batch:
Homogeneous suspension	CMC-NA	≥5mg/ml	Taking the 1 mL working solution as an example, add 5 mg of this product to 1 ml of CMC-Na solution, mix evenly to obtain a homogeneous suspension with a final concentration of 5 mg/ml.
Homogeneous suspension	CMC-NA	≥5mg/ml	Taking the 1 mL working solution as an example, add 5 mg of this product to 1 ml of CMC-Na solution, mix evenly to obtain a homogeneous suspension with a final concentration of 5 mg/ml.
Clear solution	5%DMSO 1 40%PEG300 2 5%Tween80 3 50%ddH2O Validated by Selleck labs. Should you need adjustments to this formulation, contact our sales team for custom testing.	3.200mg/ml (10.05mM)	Taking the 1 mL working solution as an example, add 50 μL 64 mg/ml clarified DMSO stock solution to 400 μL PEG300, mix evenly to clarify it; add 50 μL Tween80 to the above system, mix evenly to clarify it; then continue to add 500 μL ddH2O to adjust the volume to 1 mL. The mixed solution should be used immediately for optimal results.
Homogeneous suspension	CMC-NA	≥5mg/ml	Taking the 1 mL working solution as an example, add 5 mg of this product to 1 ml of CMC-Na solution, mix evenly to obtain a homogeneous suspension with a final concentration of 5 mg/ml.

In vivo Formulation Calculator (Clear solution)

Step 1: Enter information below (Recommended: An additional animal making an allowance for loss during the experiment)

Dosage: mg/kg

Average weight of animals: g

Dosing volume per animal: μL

Number of animals:

Step 2: Enter the in vivo formulation (This is only the calculator, not formulation. Please contact us first if there is no in vivo formulation at the solubility Section.)

% DMSO

% Tween 80

% ddH₂O

% DMSO

Calculation results:

Working concentration: mg/ml;

Method for preparing DMSO master liquid: mg drug pre-dissolved in μL DMSO ( Master liquid concentration mg/mL, Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug. )

Method for preparing in vivo formulation: Take μL DMSO master liquid, next addμL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH₂O, mix and clarify.

Method for preparing in vivo formulation: Take μL DMSO master liquid, next add μL Corn oil, mix and clarify.

Note: 1. Please make sure the liquid is clear before adding the next solvent.
2. Be sure to add the solvent(s) in order. You must ensure that the solution obtained, in the previous addition, is a clear solution before proceeding to add the next solvent. Physical methods such
as vortex, ultrasound or hot water bath can be used to aid dissolving.

Chemical Information, Storage & Stability

Molecular Weight	318.27	Formula	C₁₁H₉F₃N₄O₂S	Storage (From the date of receipt)	3 years -20°C powder
CAS No.	2270879-17-7	--		Storage of Stock Solutions	1 year-80°Cin solvent 1 month-20°Cin solvent

Mechanism of Action

Targets/IC₅₀/Ki	BRM SMARCA2
In vitro	BRM/BRG1 ATP Inhibitor-1 (Compound 14) is an orally active inhibitors of Brahma Homolog (BRM)/SMARCA2 (BRG1) with IC50s below 0.005 µM.
References	[1] https://pubmed.ncbi.nlm.nih.gov/30339381/

Tech Support

Handling Instructions

Tel: +1-832-582-8158 Ext:3

If you have any other enquiries, please leave a message.

C1=C0/X	C1:	LOG(C1):
C2=C1/X	C2:	LOG(C2):
C3=C2/X	C3:	LOG(C3):
C4=C3/X	C4:	LOG(C4):
C5=C4/X	C5:	LOG(C5):
C6=C5/X	C6:	LOG(C6):
C7=C6/X	C7:	LOG(C7):
C8=C7/X	C8:	LOG(C8):