Ponatinib (AP24534) SDS | MSDS

1.PRODUCT AND COMPANY IDENTIFICATION

Product identifier

Product Name: Ponatinib (AP24534)
Catalog Number: S1490
CAS Number: 943319-70-8
IUPAC Name: 3-(2-(imidazo[1,2-b]pyridazin-3-yl)ethynyl)-4-methyl-N-(4-((4-methylpiperazin-1-yl)methyl)-3-(trifluoromethyl)phenyl)benzamide

Relevant identified uses and uses advised against

Identified uses: For research and development use only; laboratory chemicals; manufacture of substances.
Uses advised against: Not for pharmaceutical, household, or other unapproved uses.

Details of the supplier

Company : Selleck Chemicals
TollFree : +1 877 796-6397
Tel : +1 832 582-8158
Fax : +1 832 582-8590

Emergency telephone number

Emergency phone #: +1 832 582-8158

2. HAZARDS IDENTIFICATION

2.1 Classification of the substance or mixture
GHS Classification in accordance with 29 CFR 1910 (OSHA HCS):

Acute toxicity, oral (Category 3), H301
Acute toxicity, dermal (Category 3), H311
Skin corrosion/irritation (Category 2), H315
Serious eye damage/eye irritation (Category 2A), H319
Acute toxicity, inhalation (Category 3), H331
Specific target organ toxicity, single exposure; Respiratory tract irritation (Category 3), H335

2.2 GHS Label elements, including precautionary statements
Pictogram: GHS06

Signal word: Danger
Hazard statement(s):
- H301 Toxic if swallowed
- H311 Toxic in contact with skin
- H315 Causes skin irritation
- H319 Causes serious eye irritation
- H331 Toxic if inhaled
- H335 May cause respiratory irritation
Precautionary statement(s):
- Prevention:
  - P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
  - P264 Wash hands thoroughly after handling.
  - P270 Do not eat, drink or smoke when using this product.
  - P271 Use only outdoors or in a well-ventilated area.
  - P280 Wear protective gloves/protective clothing/eye protection/face protection.
- Response:
  - P302+P352 IF ON SKIN: Wash with plenty of soap and water.
  - P304+P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
  - P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  - P330 Rinse mouth.
  - P361 Remove/Take off immediately all contaminated clothing.
- Storage:
  - P403+P233 Store in a well-ventilated place. Keep container tightly closed.
  - P405 Store locked up.
- Disposal:
  - P501 Dispose of contents/container in accordance with local regulation.

2.3 Other hazards
None.

3. COMPOSITION/INFORMATION ON INGREDIENTS

3.1 Substances

Synonyms: AP24534
Formula: 3-(2-(imidazo[1,2-b]pyridazin-3-yl)ethynyl)-4-methyl-N-(4-((4-methylpiperazin-1-yl)methyl)-3-(trifluoromethyl)phenyl)benzamide
Molecular Weight: 532.56
CAS No.: 943319-70-8

4. FIRST AID MEASURES

4.1 Description of first aid measures

Eye contact: Remove any contact lenses, locate eye-wash station, and flush eyes immediately with large amounts of water. Separate eyelids with fingers to ensure adequate flushing. Promptly call a physician.
Skin contact: Rinse skin thoroughly with large amounts of water. Remove contaminated clothing and shoes and call a physician.
Inhalation: Immediately relocate self or casualty to fresh air. If breathing is difficult, give cardiopulmonary resuscitation (CPR). Avoid mouth-to-mouth resuscitation.
Ingestion: Wash out mouth with water; Do NOT induce vomiting; call a physician.

4.2 Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2).

4.3 Indication of any immediate medical attention and special treatment needed
Treat symptomatically.

5. FIRE FIGHTING MEASURES

5.1 Extinguishing media

Suitable extinguishing media: Use water spray, dry chemical, foam, and carbon dioxide fire extinguisher.

5.2 Special hazards arising from the substance or mixture
During combustion, may emit irritant fumes.

5.3 Advice for firefighters

Special protective equipment for firefighters: Use personal protective equipment.
Specific extinguishing methods: Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Immediately evacuate personnel to safe areas. Remove undamaged containers from fire area if it is safe to do so.

6. ACCIDENTAL RELEASE MEASURES

6.1 Personal precautions, protective equipment and emergency procedures
Use full personal protective equipment. Avoid breathing vapors, mist, dust or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Refer to protective measures listed in section 8.

6.2 Environmental precautions
Try to prevent further leakage or spillage. Keep the product away from drains or water courses.

6.3 Methods and materials for containment and cleaning up
Absorb solutions with finely-powdered liquid-binding material (diatomite, universal binders); Decontaminate surfaces and equipment by scrubbing with alcohol; Dispose of contaminated material according to Section 13.

6.4 Reference to other sections
For disposal see section 13.

7. HANDLING AND STORAGE

7.1 Precautions for safe handling
Avoid inhalation, contact with eyes and skin. Avoid dust and aerosol formation. Use only in areas with appropriate exhaust ventilation.

7.2 Conditions for safe storage, including any incompatibilities
Keep container tightly sealed in cool, well-ventilated area. Keep away from direct sunlight and sources of ignition.

Recommended storage temperature:
- powder: -20°C for 3 years; 4°C for 2 years.
- In solvent: -80°C for 2 years; -20°C for 1 year.
  Shipping at room temperature is acceptable if less than 2 weeks.

7.3 Specific end use(s)
N/A.

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

8.1 Control parameters

Components with workplace control parameters: This product contains no substances with occupational exposure limit values.

8.2 Exposure controls

Engineering controls: Ensure adequate ventilation. Provide accessible safety shower and eye wash station.
Personal protective equipment:
- Eye protection: Safety goggles with side-shields.
- Hand protection: Protective gloves.
- Skin and body protection: Impervious clothing.
- Respiratory protection: Suitable respirator.
Environmental exposure controls: Keep the product away from drains, water courses or the soil. Clean spillages in a safe way as soon as possible.

9. PHYSICAL AND CHEMICAL PROPERTIES

9.1 Information on basic physical and chemical properties

Appearance: powder
Odor: N/A
Odor threshold: N/A
pH: N/A
Melting/freezing point: >175°C
Boiling point/range: N/A
Flash point: N/A
Evaporation rate: N/A
Flammability (solid, gas): N/A
Upper/lower flammability or explosive limits: N/A
Vapor pressure: N/A
Vapor density: N/A
Relative density: N/A
Water Solubility: N/A
Partition coefficient: N/A
Auto-ignition temperature: N/A
Decomposition temperature: N/A
Viscosity: N/A
Explosive properties: N/A
Oxidizing properties: N/A

9.2 Other safety information
N/A.

10. STABILITY AND REACTIVITY

10.1 Reactivity
N/A.

10.2 Chemical stability
Stable under recommended storage conditions.

10.3 Possibility of hazardous reactions
N/A.

10.4 Conditions to avoid
N/A.

10.5 Incompatible materials
Strong acids/alkalis, strong oxidising/reducing agents.

10.6 Hazardous decomposition products
Under fire conditions, may decompose and emit toxic fumes. Other decomposition products - no data available.

11. TOXICOLOGICAL INFORMATION

11.1 Information on toxicological effects

Acute toxicity: Classified based on available data. For more details, see section 2.
Skin corrosion/irritation: Classified based on available data. For more details, see section 2.
Serious eye damage/irritation: Classified based on available data. For more details, see section 2.
Respiratory or skin sensitization: Classified based on available data. For more details, see section 2.
Germ cell mutagenicity: Classified based on available data. For more details, see section 2.
Carcinogenicity:
- IARC: No component of this product present at a level equal to or greater than 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
- ACGIH: No component of this product present at a level equal to or greater than 0.1% is identified as a potential or confirmed carcinogen by ACGIH.
- NTP: No component of this product present at a level equal to or greater than 0.1% is identified as an anticipated or confirmed carcinogen by NTP.
- OSHA: No component of this product present at a level equal to or greater than 0.1% is identified as a potential or confirmed carcinogen by OSHA.
Reproductive toxicity: Classified based on available data. For more details, see section 2.
Specific target organ toxicity - single exposure: Classified based on available data. For more details, see section 2.
Specific target organ toxicity - repeated exposure: Classified based on available data. For more details, see section 2.
Aspiration hazard: Classified based on available data. For more details, see section 2.
Additional information: This information is based on our current knowledge. However, the chemical, physical, and toxicological properties have not been completely investigated.

12. ECOLOGICAL INFORMATION

12.1 Toxicity
N/A.

12.2 Persistence and degradability
N/A.

12.3 Bioaccumulative potential
N/A.

12.4 Mobility in soil
N/A.

12.5 Results of PBT and vPvB assessment
PBT/vPvB assessment unavailable as chemical safety assessment not required or not conducted.

12.6 Other adverse effects
N/A.

13. DISPOSAL CONSIDERATIONS

13.1 Waste treatment methods

Product: Dispose substance in accordance with prevailing country, federal, state and local regulations.
Contaminated packaging: Conduct recycling or disposal in accordance with prevailing country, federal, state and local regulations.

14. TRANSPORT INFORMATION

DOT (US)

Proper shipping name: TOXIC powder, ORGANIC, N. O. S.
UN number: 2811
Class: 6.1
Packing group: III

IMDG

Proper shipping name: TOXIC powder, ORGANIC, N. O. S.
UN number: 2811
Class: 6.1
Packing group: III

IATA

16. OTHER INFORMATION

Revision Date: 2026/08/04
Further Information: The information provided is believed to be correct but is not exhaustive and should be used only as a guideline based on current knowledge. It does not represent a guarantee of the properties of the product. Selleck Chemicals Corporation and its Affiliates shall not be held liable for any damage resulting from handling or contact with the product.