ABT-199 (Venetoclax) SDS | MSDS

1.PRODUCT AND COMPANY IDENTIFICATION

Product identifier

Product Name: ABT-199 (Venetoclax)
Catalog Number: S8048
CAS Number: 1257044-40-8
IUPAC Name: Benzamide, 4-[4-[[2-(4-chlorophenyl)-4,4-dimethyl-1-cyclohexen-1-yl]methyl]-1-piperazinyl]-N-[[3-nitro-4-[[(tetrahydro-2H-pyran-4-yl)methyl]amino]phenyl]sulfonyl]-2-(1H-pyrrolo[2,3-b]pyridin-5-yloxy)-

Relevant identified uses and uses advised against

Identified uses: For research and development use only; laboratory chemicals; manufacture of substances.
Uses advised against: Not for pharmaceutical, household, or other unapproved uses.

Details of the supplier

Company : Selleck Chemicals
TollFree : +1 877 796-6397
Tel : +1 832 582-8158
Fax : +1 832 582-8590

Emergency telephone number

Emergency phone #: +1 832 582-8158

2. HAZARDS IDENTIFICATION

2.1 Classification of the substance or mixture This substance does not meet the classification criteria of EC Directives 67/548/EEC, 1999/45/EC, or 1272/2008.

2.2 Label elements The product does not require labeling in accordance with EC directives or respective national laws.

2.3 Other hazards None identified.

3. COMPOSITION/INFORMATION ON INGREDIENTS

3.1 Substances

Product Name: ABT 199
Synonyms: Venetoclax, GDC-0199
Formula: Benzamide, 4-[4-[[2-(4-chlorophenyl)-4,4-dimethyl-1-cyclohexen-1-yl]methyl]-1-piperazinyl]-N-[[3-nitro-4-[[(tetrahydro-2H-pyran-4-yl)methyl]amino]phenyl]sulfonyl]-2-(1H-pyrrolo[2,3-b]pyridin-5-yloxy)-
Molecular Weight: 868.45
CAS Number: 1257044-40-8

4. FIRST AID MEASURES

4.1 Description of first aid measures

General Advice: Consult a physician and present this safety data sheet.
If Inhaled: Move person to fresh air and monitor breathing. If breathing is difficult, administer oxygen. If breathing stops, perform artificial respiration and consult a physician.
In Case of Skin Contact: Immediately wash the affected area with copious amounts of soap and water for at least 15 minutes. Remove contaminated clothing and shoes; wash before reuse. Consult a physician.
In Case of Eye Contact: Flush eyes with copious amounts of water for at least 15 minutes and consult a physician.
If Swallowed: Rinse mouth with water. Do not induce vomiting unless directed by medical personnel. Never give anything by mouth to an unconscious person. Consult a physician.

4.2 Most important symptoms and effects, both acute and delayed To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.

4.3 Indication of immediate medical attention and special treatment needed Immediate medical attention is required. Show this safety data sheet to the attending physician.

5. FIRE-FIGHTING MEASURES

5.1 Extinguishing media Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide.

5.2 Special hazards arising from the substance or mixture Combustion may result in the emission of toxic fumes.

5.3 Precautions for fire-fighters Wear suitable protective clothing and self-contained breathing apparatus (SCBA) to prevent contact with skin and eyes.

6. ACCIDENTIAL RELEASE MEASURES

6.1 Personal precautions, protective equipment and emergency procedures Do not take action without suitable protective clothing (see Section 8). Evacuate personnel to safe areas and ensure adequate ventilation. Avoid breathing vapors, mist, powder, or gas.

6.2 Environmental precautions Prevent product from entering drains.

6.3 Methods and materials for containment and cleaning up Cover spillage with suitable absorbent material. Sweep up the powder and place it in an appropriate container for disposal as described in Section 13.

6.4 Reference to other sections Refer to Section 8 for personal protective equipment and Section 13 for disposal instructions.

7. HANDLING AND STORAGE

7.1 Precautions for safe handling Use within a chemical fume hood with an independent air supply system. Avoid inhalation and contact with eyes, skin, and clothing. Avoid the formation of powder and aerosols. Use in a well-ventilated area and keep away from sources of ignition. Avoid prolonged or repeated exposure.

7.2 Conditions for safe storage, including any incompatibilities Store in a cool, well-ventilated area away from direct sunlight. Keep the container tightly sealed until use. Recommended storage temperature: -20°C.

7.3 Specific end uses Use in a laboratory fume hood where possible. Refer to the employer's COSHH risk assessment.

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

8.1 Control parameters Contains no substances with occupational exposure limit values.

8.2 Exposure controls

Appropriate Engineering Controls: Use in a fume hood where applicable. Ensure all engineering measures from Section 7 are implemented. The laboratory should be equipped with a safety shower and eye wash station.
Eye/Face Protection: Use appropriate safety glasses.
Skin Protection: Use appropriate chemical-resistant gloves (minimum requirement: standard BS EN 374:2003). Inspect gloves before use; wash and dry hands thoroughly after handling.
Body Protection: Wear appropriate protective clothing.
Respiratory Protection: Use a suitable respirator if a risk assessment indicates it is necessary.

9. PHYSICAL AND CHEMICAL PROPERTIES

9.1 Information on basic physical and chemical properties

Appearance: Yellow powder
Odor: N/A
Odor Threshold: N/A
pH: N/A
Melting / Freezing Point: N/A
Boiling Point / Range: N/A
Flash Point: N/A
Evaporation Rate: N/A
Flammability (solid, gas): N/A
Upper / Lower Flammability or Explosive Limits: N/A
Vapor Pressure: N/A
Vapor Density: N/A
Relative Density: N/A
Solubility(ies): Soluble to 100 mM in DMSO
Partition Coefficient: N/A
Auto-ignition Temperature: N/A
Decomposition Temperature: N/A
Viscosity: N/A
Explosive Properties: N/A
Oxidising Properties: N/A

9.2 Other safety information N/A.

10. STABILITY AND REACTIVITY

10.1 Reactivity Stable under recommended transport or storage conditions.

10.2 Chemical stability Stable under recommended storage conditions.

10.3 Possibility of hazardous reactions Hazardous reactions will not occur under normal transport or storage conditions. Decomposition may occur upon exposure to specified conditions or materials.

10.4 Conditions to avoid Heat and moisture.

10.5 Incompatible materials Strong acids/alkalis, strong oxidizing/reducing agents.

10.6 Hazardous decomposition products In combustion, may emit toxic fumes. No known decomposition information.

11. TOXICOLOGICAL INFORMATION

11.1 Information on toxicological effects

Acute Toxicity: N/A.
Skin Corrosion/Irritation: Classification criteria are not met based on available data.
Serious Eye Damage/Irritation: Classification criteria are not met based on available data.
Respiratory or Skin Sensitization: Classification criteria are not met based on available data.
Germ Cell Mutagenicity: Classification criteria are not met based on available data.
Carcinogenicity: Classification criteria are not met based on available data.
Reproductive Toxicity: Classification criteria are not met based on available data.
Specific Target Organ Toxicity - Single Exposure: Classification criteria are not met based on available data.
Specific Target Organ Toxicity - Repeated Exposure: Classification criteria are not met based on available data.
Aspiration Hazard: Classification criteria are not met based on available data.

Symptoms / Routes of Exposure

Inhalation: May cause throat irritation with a feeling of tightness in the chest.
Ingestion: May cause throat irritation.
Skin: May cause mild irritation at the site of contact.
Eyes: May cause irritation and redness.
Delayed / Immediate Effects: No known symptoms.

Additional Information

RTECS No: Not available.
Exposure may cause irritation of eyes, mucous membranes, upper respiratory tract, and skin. To the best of our knowledge, the chemical, physical, and toxicological properties have not been fully investigated.

12. ECOLOGICAL INFORMATION

12.1 Toxicity N/A.

12.2 Persistence and degradability N/A.

12.3 Bioaccumulative potential N/A.

12.4 Mobility in soil N/A.

12.5 Results of PBT and vPvB assessment N/A.

12.6 Other adverse effects N/A.

13. DISPOSAL CONSIDERATIONS

13.1 Waste treatment methods

Product: Transfer to a suitable container and arrange for collection by a specialized disposal company in accordance with national legislation.
Contaminated Packaging: Dispose of in a regulated landfill site or via other methods for hazardous or toxic wastes in accordance with national legislation.

14. TRANSPORT INFORMATION

Classified according to the criteria of the UN Model Regulations as reflected in the IMDG Code, ADR, RID, and IATA.

14.1 UN-Number Does not meet the criteria for classification as hazardous for transport.

14.2 UN proper shipping name Does not meet the criteria for classification as hazardous for transport.

14.3 Transport hazard class(es) Does not meet the criteria for classification as hazardous for transport.

14.4 Packaging group Does not meet the criteria for classification as hazardous for transport.

14.5 Environmental hazards This product is not classified as environmentally hazardous according to the UN Model Regulations, nor a marine pollutant according to the IMDG Code.

14.6 Special precautions for users N/A.

15. REGULATORY INFORMATION

This safety datasheet complies with the requirements of Regulation (EC) No. 453/2010.

15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture N/A California Proposition 65 Not applicable

15.2 Chemical safety assessment A Chemical Safety Assessment has not been made for this product.

16. OTHER INFORMATION

Revision Date: 2026/05/28 Further Information: The information provided is believed to be correct but is not exhaustive and should be used only as a guideline based on current knowledge. It does not represent a guarantee of the properties of the product. Selleck Chemicals Corporation and its Affiliates shall not be held liable for any damage resulting from handling or contact with the product.