🛡️ Hazard Overview
- GHS Class: GHS02; GHS05; GHS07; GHS08
- Signal Word: Danger
- Hazard Statements: H228; H302; H315; H318; H319; H335; H361; H371; H372; H412
🧤 PPE Guidelines
- Gloves: Chemical‑resistant gloves suggested
- Eye Protection: Safety goggles suggested
- Respirator: Dust respirator if dust occurs
❄️ Storage
- Storage Temp: -20°C (-4°F) Keep dry
🚑 Emergency First Aid
- For inhalation, skin, eye or ingestion exposure, please refer to full SDS Section 4.
Product identifier
- Product Name: Triethylenediamine
- Catalog Number: E2967
- CAS Number: 280-57-9
- IUPAC Name: 1,4-Diazabicyclo[2.2.2]octane
Relevant identified uses and uses advised against
- Identified uses: For research and development use only; laboratory chemicals; manufacture of substances.
- Uses advised against: Not for pharmaceutical, household, or other unapproved uses.
Details of the supplier
- Company: Selleck Chemicals
- TollFree: +1 877 796-6397
- Tel: +1 832 582-8158
- Fax: +1 832 582-8590
Emergency telephone number
- Emergency phone #: +1 832 582-8158
2.1 GHS classification in accordance with 29 CFR 1910 (OSHA HCS):
Flammable solids: Category 1. H228
Acute toxicity (oral): Category 4. H302
Skin irritation: Category 2. H315
Serious eye damage: Category 1. H318
Serious eye irritation: Category 2. H319
Specific target organ toxicity (single exposure): Category 3. H335
Reproductive toxicity: Category 2. H361
Specific target organ toxicity (single exposure): Category 2. H371
Specific target organ toxicity (repeated exposure): Category 1. H372
Chronic aquatic toxicity: Category 3. H412
2.2 GHS Label elements, including precautionary statements
Hazard Pictogram(s):
![]()
Signal Word:
Danger
Hazard statement(s):
H228: Flammable solid
H302: Harmful if swallowed
H315: Causes skin irritation
H318: Causes serious eye damage
H319: Causes serious eye irritation
H335: May cause respiratory irritation
H361: Suspected of damaging fertility or the unborn child
H371: May cause damage to organs
H372: Causes damage to organs through prolonged or repeated exposure
H412: Harmful to aquatic life with long lasting effects
Precautionary statement(s):
Prevention:
P203: Obtain, read and follow all safety instructions before use.
P210: Keep away from heat, hot surface, sparks, open flames and other ignition sources. No smoking.
P240: Ground/bond container and receiving equipment.
P241: Use explosion-proof electrical/ventilating/lighting equipment.
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P264: Wash hands thoroughly after handling.
P264+P265: Wash hands thoroughly after handling. Do not touch eyes.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection/hearing protection.
Response:
P301+P317: IF SWALLOWED: Get medical help.
P302+P352: IF ON SKIN: wash with plenty of water.
P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351: IF IN EYES: Rinse cautiously with water for several minutes.
P305+P354: IF IN EYES: Immediately rinse with water for several minutes.
P308+P316: IF exposed or concerned: Get emergency medical help immediately.
P317: Get emergency medical help.
P318: if exposed or concerned, get medical advice.
P319: Get medical help if you feel unwell.
P321: Specific treatment (see information on this label and safety datasheet)).
P330: Rinse mouth.
P332+P317: If skin irritation occurs: Get medical help.
P337+P317: If eye irritation persists: Get medical help.
P338: Remove contact lenses, if present and easy to do. Continue rinsing.
P362+P364: Take off contaminated clothing and wash it before reuse.
P370+P378: In case of fire: Use water spray, dry chemical, carbon dioxide, or appropriate foam to extinguish.
Storage:
P403+P233: Store in a well-ventilated place. Keep container tightly closed.
P405: Store locked up.
Disposal:
P501: P501 Dispose of contents/ container to an approved waste disposal plant.
2.3 Other hazards
None.
3.1 Substances
Product name: Triethylenediamine
CAS Number: 280-57-9
PubChem CID: 9237
Molecular formula: C6H12N2
Molecular weight: 112.17 g/mol
IUPAC name: 1,4-diazabicyclo[2.2.2]octane
3.2 Mixtures
Not applicable (pure substance).
4.1 Description of first aid measures
Inhalation: Move to fresh air. Keep at rest in a position comfortable for breathing. Seek medical attention if symptoms persist.
Skin contact: Wash with plenty of soap and water. Remove contaminated clothing. Seek medical attention if irritation develops.
Eye contact: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. Seek medical attention.
Ingestion: Rinse mouth. Do NOT induce vomiting unless directed by medical personnel. Seek medical attention.
4.2 Most important symptoms and effects, both acute and delayed
See Section 11 (Toxicological Information).
4.3 Indication of any immediate medical attention and special treatment needed
Treat symptomatically. Contact a poison control center or physician for severe exposure.
5.1 Extinguishing media
Suitable: Dry chemical, carbon dioxide (CO2), alcohol-resistant foam, water spray.
Unsuitable: High-pressure water jet (may spread fire).
5.2 Specific hazards arising from the substance or mixture
Combustible. Heating may produce toxic fumes.
5.3 Advice for firefighters
Wear self-contained breathing apparatus (SCBA) and full protective clothing.
Fight fire from upwind. Cool containers with water spray until fire is extinguished.
Flash point: 62 °C
6.1 Personal precautions, protective equipment and emergency procedures
Wear appropriate personal protective equipment (see Section 8).
Avoid breathing dust/vapor. Ensure adequate ventilation.
Evacuate personnel to safe areas. Keep people away from and upwind of spill.
6.2 Environmental precautions
Prevent product from entering drains, waterways, or soil.
Contain spill with inert absorbent material.
6.3 Methods and materials for containment and cleaning up
SRP: The most favorable course of action is to use an alternative chemical product with less inherent propensity for occupational exposure or environmental contamination. Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in soil or water; effects on animal, aquatic, and plant life; and conformance with environmental and public health regulations.
7.1 Precautions for safe handling
Handle in accordance with good industrial hygiene and safety practices.
Wear appropriate PPE (see Section 8). Avoid contact with skin, eyes, and clothing.
Wash hands thoroughly after handling. Do not eat, drink, or smoke in work area.
Avoid dust formation. Use only in a chemical fume hood or well-ventilated area.
Keep away from heat, sparks, and open flames. Use explosion-proof equipment.
7.2 Conditions for safe storage, including any incompatibilities
Store in a cool, dry, well-ventilated area. Keep container tightly closed.
Store away from incompatible materials (see Section 10).
Protect from light and moisture.
Recommended storage (industry convention for research compounds): -20°C for long-term storage; 2-8°C for short-term use and transport.
[Note: This is a general industry recommendation. Always verify exact storage conditions with the supplier Certificate of Analysis (COA).]
Store in original container. Keep upright to prevent leakage.
8.1 Exposure controls
8.1.1 Occupational exposure limits (OEL)
OSHA PEL: Not established.
ACGIH TLV: Not established.
NIOSH REL: Not established.
No occupational exposure limit values are established for this substance.
Use the lowest feasible exposure level (ALARA principle).
8.1.2 Appropriate engineering controls
Use only in a chemical fume hood or with local exhaust ventilation.
Ensure adequate ventilation to keep airborne concentrations below exposure limits.
8.2 Individual protection measures
8.2.1 Eye/face protection
Wear chemical safety goggles and face shield.
8.2.2 Skin protection
Wear protective gloves. Recommended material: Nitrile rubber.
Wear suitable protective clothing (lab coat).
8.2.3 Respiratory protection
Use NIOSH-approved dust/mist respirator (N95 or higher) if ventilation is inadequate.
8.2.4 Thermal hazards
Not applicable.
9.1 Information on basic physical and chemical properties
a) Appearance: Liquid; Large Crystals
b) Odor: No data available
c) Odor threshold: No data available
d) pH: No data available
e) Melting point/freezing point: 158 °C
f) Initial boiling point and boiling range: 174 °C
g) Flash point: 62 °C
h) Evaporation rate: No data available
i) Flammability (solid, gas): No data available
j) Upper/lower flammability or explosive limits: No data available
k) Vapor pressure: 0.74 [mmHg]
l) Vapor density: No data available
m) Relative density: 1.14 at 28 °C (Water = 1)[NITE; Chemical Risk Information Platform (CHRIP). Biodegradation and Bioconcentration. Ver 2006.01.30 Updated. National Institute of Technology and Evaluation. Tokyo, Japan. Thiodiethylene glycolBicyclo
n) Water solubility: 13 g/100 g acetone at 25 °C; 51 g/100 g benzene at 25 °C; 77 g/100 g ethanol at 25 °C; 26.1 g/100 g methyl ethyl ketone at 25 °C
o) Partition coefficient: n-octanol/water: Log P (n-octanol/water): -0.2
p) Auto-ignition temperature: No data available
q) Decomposition temperature: No data available
r) Viscosity: No data available
s) Explosive properties: No data available
t) Oxidizing properties: No data available
9.2 Other information
Topological Polar Surface Area (TPSA): 6.5 Ų
Complexity: 61
10.1 Reactivity
No specific reactivity hazards identified under normal handling conditions.
10.2 Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
No hazardous reactions under normal conditions.
10.4 Conditions to avoid
Avoid heat, sparks, open flames, direct sunlight, and moisture.
Avoid strong oxidizing agents, strong acids, and strong bases.
10.5 Incompatible materials
... In paint manufacture, preliminary small-scale (12 g) tests in which ethyl acetate soln of cellulose nitrate and the other components were mixed in a lagged boiling tube showed large exotherms (which boiled the solvent off) with 1,4-diazabicyclo(2.2.2)octane ... Subsequent test in which small portions of ... undiluted /1,4-diazabicyclo(2.2.2.)octane/ and dried cellulose nitrate linters were contacted (with a little added butyl acetate for the solid phenol) under various condition ... ignition /occurred/ ...
Activated carbon showed an auto-ignition temp in flowing air of 452 to 518 °C. Presence of 5% of ... triethylenediamine adsorbed on the carbon reduced the autoignition temp (AIT) to 230 to 260 °C. At high air flow rates an exotherm was seen at 230 to 260 °C but ignition did not then occur until 500 °C.
A sample of the 1:1 complex /of 1.4-diazabicyclo(2.2.2)octane and hydrogen peroxide/exploded while being dried overnight in a desiccator.
10.6 Hazardous decomposition products
Thermal decomposition may produce: Carbon monoxide (CO), Carbon dioxide (CO₂), Nitrogen oxides (NOx).
See also Section 5 (Fire-fighting measures) for combustion products.
11.1 Information on toxicological effects
Acute toxicity:
No acute toxicity data available.
Skin corrosion/irritation:
Causes skin irritation (H315).
Serious eye damage/eye irritation:
Causes serious eye damage (H318).
Respiratory or skin sensitization:
No data available.
Germ cell mutagenicity:
No data available.
Carcinogenicity:
No data available.
Reproductive toxicity:
Suspected of damaging fertility or the unborn child (H361).
Specific target organ toxicity (single exposure):
H371, H372
Specific target organ toxicity (repeated exposure):
No data available.
Aspiration hazard:
No data available.
11.2 Additional information
No additional toxicological information available.
12.1 Toxicity
LC50; Species: Pimephales promelas (Fathead minnow, size 17.5 mm, wt 0.085 g); Conditions: freshwater; flow-through; Concentration: 1730000 ug/L (95% confidence limit: 1510000 to 1980000 ug/L) for 4 days /active ingredient/
Triethylenediamine's production and use as a catalyst in the manufacture of urethane foams may result in its release to the environment through various waste streams. If released to air, a vapor pressure of 0.742 mm Hg at 25 °C indicates triethylenediamine will exist solely as a vapor in the atmosphere. Vapor-phase triethylenediamine will be degraded in the atmosphere by reaction with photochemically-produced hydroxyl radicals; the half-life for this reaction in air is estimated to be 18 hours. Triethylenediamine does not contain chromophores that absorb at wavelengths >290 nm and therefore is not expected to be susceptible to direct photolysis by sunlight. If released to soil, triethylenediamine is expected to have very high mobility based upon an estimated Koc of 3.4. The pKa1 and pKa2 of triethylenediamine are 3.0 and 8.7, respectively, indicating that this compound will primarily exist in the cation form in the environment and cations generally have lower mobility in soils than their neutral counterparts. Volatilization from moist soil surfaces is not expected to be an important fate process since triethylenediamine primarily exists in the cation form in the environment. Triethylenediamine may volatilize from dry soil surfaces slowly based upon its va
12.2 Persistence and degradability
No data available.
12.3 Bioaccumulative potential
Log P (n-octanol/water): -0.2
Low potential for bioaccumulation (Log P < 3).
12.4 Mobility in soil
No data available.
12.5 Results of PBT and vPvB assessment
PBT/vPvB assessment not available.
12.6 Other adverse effects
This substance is classified as hazardous to the aquatic environment.
13.1 Waste treatment methods
Waste Treatment Methods: Waste material must be disposed of in accordance with national and local regulations. Leave chemicals in original containers and do not mix with other waste. Handle uncleaned containers in the same manner as the product itself.
14.1 UN number
Not regulated as dangerous goods (research quantities typically exempt).
14.2 UN proper shipping name
Not subject to transport regulations (small quantities for research use).
14.3 Transport hazard class(es)
Not classified as dangerous goods for transport (research quantities).
14.4 Packing group
Not applicable (not regulated as dangerous goods in typical research quantities).
14.5 Environmental hazards
Marine pollutant: No (not classified as environmentally hazardous per GHS).
14.6 Special precautions for user
Transport in original packaging. Ensure containers are tightly sealed.
For bulk or commercial quantities, consult applicable transport regulations (DOT, IATA, IMDG).
14.7 Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not applicable.
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
US EPA / TSCA: Subject to EPA TSCA regulations
EU ECHA / REACH: Registered (REACH Active)
SARA 302 Components:
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313 Components:
This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 Hazards:
Acute (short-term) health hazard
Chronic (long-term) health hazard
Environmental hazard
Fire hazard
Massachusetts Right To Know Components:
This material contains components subject to the Massachusetts Right to Know Act. See Section 2 for hazard classification.
Pennsylvania Right To Know Components:
This material contains components subject to the Pennsylvania Right to Know Act. See Section 2 for hazard classification.
New Jersey Right To Know Components:
This material contains components subject to the New Jersey Right to Know Act. See Section 2 for hazard classification.
California Prop. 65 Components:
This product does not contain any chemicals known to the State of California to cause cancer, birth defects, or any other reproductive harm.
Other regulatory listings:
- The Australian Inventory of Industrial Chemicals: Chemical: 1,4-Diazabicyclo[2.2.2]octane
15.2 Chemical safety assessment
A chemical safety assessment has not been carried out for this substance.
For research-use-only compounds, no CSA is required under REACH Annex I.
Revision Date: 2026/09/08
Further Information: The information provided is believed to be correct but is not exhaustive and should be used only as a guideline based on current knowledge. It does not represent a guarantee of the properties of the product. Selleck Chemicals Corporation and its Affiliates shall not be held liable for any damage resulting from handling or contact with the product.