🛡️ Hazard Overview
- GHS Class: None
- Signal Word: Not applicable
- Hazard Statements: None
🧤 PPE Guidelines
- Gloves: Chemical‑resistant gloves suggested
- Eye Protection: Safety goggles suggested
- Respirator: Dust respirator if dust occurs
❄️ Storage
- Storage Temp: -20°C (-4°F) Keep dry
🚑 Emergency First Aid
- For inhalation, skin, eye or ingestion exposure, please refer to full SDS Section 4.
Product identifier
- Product Name: Thonzylamine
- Catalog Number: S6469
- CAS Number: 91-85-0
- IUPAC Name: 1,2-Ethanediamine, N1-[(4-methoxyphenyl)methyl]-N2,N2-dimethyl-N1-2-pyrimidinyl-
Relevant identified uses and uses advised against
- Identified uses: For research and development use only; laboratory chemicals; manufacture of substances.
- Uses advised against: Not for pharmaceutical, household, or other unapproved uses.
Details of the supplier
- Company: Selleck Chemicals
- TollFree: +1 877 796-6397
- Tel: +1 832 582-8158
- Fax: +1 832 582-8590
Emergency telephone number
- Emergency phone #: +1 832 582-8158
2.1 GHS classification in accordance with 29 CFR 1910 (OSHA HCS):
Not classified as a hazardous substance according to GHS.
2.2 GHS Label elements, including precautionary statements
Hazard Pictogram(s):
None.
Signal Word:
Not applicable
Hazard statement(s):
None.
Precautionary statement(s):
None.
2.3 Other hazards
None.
3.1 Substances
Product name: Thonzylamine
CAS Number: 91-85-0
PubChem CID: 5457
Molecular formula: C16H22N4O
Molecular weight: 286.37 g/mol
IUPAC name: N'-[(4-methoxyphenyl)methyl]-N,N-dimethyl-N'-pyrimidin-2-ylethane-1,2-diamine
3.2 Mixtures
Not applicable (pure substance).
4.1 Description of first aid measures
Inhalation: INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to t
Skin contact: SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.
Eye contact: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.
Ingestion: INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport
4.2 Most important symptoms and effects, both acute and delayed
See Section 11 (Toxicological Information).
4.3 Indication of any immediate medical attention and special treatment needed
Treat symptomatically. Contact a poison control center or physician for severe exposure.
5.1 Extinguishing media
Suitable: Water spray, dry chemical, carbon dioxide (CO2), alcohol-resistant foam.
Unsuitable: None known.
5.2 Specific hazards arising from the substance or mixture
This compound is not very flammable but any fire involving this compound may produce dangerous vapors. You should evacuate the area. All firefighters should wear full-body protective clothing and use self-contained breathing apparatuses. You should extinguish any fires involving this chemical with a dry chemical, carbon dioxide, foam, or halon extinguisher. (NTP, 1992)
5.3 Advice for firefighters
Wear self-contained breathing apparatus (SCBA) and full protective clothing.
Fight fire from upwind. Cool containers with water spray until fire is extinguished.
6.1 Personal precautions, protective equipment and emergency procedures
Wear appropriate personal protective equipment (see Section 8).
Avoid breathing dust/vapor. Ensure adequate ventilation.
Evacuate personnel to safe areas. Keep people away from and upwind of spill.
6.2 Environmental precautions
Prevent product from entering drains, waterways, or soil.
Contain spill with inert absorbent material.
6.3 Methods and materials for containment and cleaning up
Sweep up or absorb with inert material (e.g., sand, vermiculite).
Place in sealed, labeled container for disposal.
Wash spill area with water.
7.1 Precautions for safe handling
STORAGE PRECAUTIONS: You should keep this material in a tightly-closed container under an inert atmosphere, and store it in a freezer. (NTP, 1992)
7.2 Conditions for safe storage, including any incompatibilities
Store in a cool, dry, well-ventilated area. Keep container tightly closed.
Store away from incompatible materials (see Section 10).
Protect from light and moisture.
Recommended storage (industry convention for research compounds): -20°C for long-term storage; 2-8°C for short-term use and transport.
[Note: This is a general industry recommendation. Always verify exact storage conditions with the supplier Certificate of Analysis (COA).]
Store in original container. Keep upright to prevent leakage.
8.1 Exposure controls
8.1.1 Occupational exposure limits (OEL)
OSHA PEL: Not established.
ACGIH TLV: Not established.
NIOSH REL: Not established.
No occupational exposure limit values are established for this substance.
Use the lowest feasible exposure level (ALARA principle).
8.1.2 Appropriate engineering controls
Use in a well-ventilated area. Chemical fume hood recommended for powder handling.
8.2 Individual protection measures
8.2.1 Eye/face protection
Wear safety glasses with side shields.
8.2.2 Skin protection
Wear protective gloves. Recommended material: Nitrile rubber.
Wear suitable protective clothing (lab coat).
8.2.3 Respiratory protection
Respiratory protection usually not required under normal use with adequate ventilation.
Use N95 respirator for large-scale powder handling.
8.2.4 Thermal hazards
Not applicable.
9.1 Information on basic physical and chemical properties
a) Appearance: Thonzylamine appears as an oily liquid. Used (in the form of the hydrochloride) as an antihistamine.
b) Odor: No data available
c) Odor threshold: No data available
d) pH: No data available
e) Melting point/freezing point: 173-176
f) Initial boiling point and boiling range: No data available
g) Flash point: No data available
h) Evaporation rate: No data available
i) Flammability (solid, gas): No data available
j) Upper/lower flammability or explosive limits: No data available
k) Vapor pressure: No data available
l) Vapor density: No data available
m) Relative density: No data available
n) Water solubility: Highly Soluble
o) Partition coefficient: n-octanol/water: Log P (n-octanol/water): 2.6
p) Auto-ignition temperature: No data available
q) Decomposition temperature: No data available
r) Viscosity: No data available
s) Explosive properties: No data available
t) Oxidizing properties: No data available
9.2 Other information
Topological Polar Surface Area (TPSA): 41.5 Ų
Complexity: 273
10.1 Reactivity
No specific reactivity hazards identified under normal handling conditions.
10.2 Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
No hazardous reactions under normal conditions.
10.4 Conditions to avoid
Avoid heat, sparks, open flames, direct sunlight, and moisture.
Avoid strong oxidizing agents, strong acids, and strong bases.
10.5 Incompatible materials
Strong oxidizing agents, strong acids, strong bases.
10.6 Hazardous decomposition products
Thermal decomposition may produce: Carbon monoxide (CO), Carbon dioxide (CO₂), Nitrogen oxides (NOx).
See also Section 5 (Fire-fighting measures) for combustion products.
11.1 Information on toxicological effects
Acute toxicity:
No acute toxicity data available.
Skin corrosion/irritation:
No data available.
Serious eye damage/eye irritation:
No data available.
Respiratory or skin sensitization:
No data available.
Germ cell mutagenicity:
No data available.
Carcinogenicity:
No data available.
Reproductive toxicity:
No data available.
Specific target organ toxicity (single exposure):
No data available.
Specific target organ toxicity (repeated exposure):
No data available.
Aspiration hazard:
No data available.
11.2 Additional information
No additional toxicological information available.
12.1 Toxicity
No ecotoxicity data available.
12.2 Persistence and degradability
No data available.
12.3 Bioaccumulative potential
Log P (n-octanol/water): 2.6
Low potential for bioaccumulation (Log P < 3).
12.4 Mobility in soil
No data available.
12.5 Results of PBT and vPvB assessment
PBT/vPvB assessment not available.
12.6 Other adverse effects
No other adverse ecological effects identified.
13.1 Waste treatment methods
Waste Treatment Methods: Waste material must be disposed of in accordance with national and local regulations. Leave chemicals in original containers and do not mix with other waste. Handle uncleaned containers in the same manner as the product itself.
14.1 UN number
Not regulated as dangerous goods (research quantities typically exempt).
14.2 UN proper shipping name
Not subject to transport regulations (small quantities for research use).
14.3 Transport hazard class(es)
Not classified as dangerous goods for transport (research quantities).
14.4 Packing group
Not applicable (not regulated as dangerous goods in typical research quantities).
14.5 Environmental hazards
Marine pollutant: No (not classified as environmentally hazardous per GHS).
14.6 Special precautions for user
Transport in original packaging. Ensure containers are tightly sealed.
For bulk or commercial quantities, consult applicable transport regulations (DOT, IATA, IMDG).
14.7 Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not applicable.
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
US EPA / TSCA: Not available in public databases.
EU ECHA / REACH: Not available in public databases.
SARA 302 Components:
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313 Components:
This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 Hazards:
No SARA Hazards.
Massachusetts Right To Know Components:
No components are subject to the Massachusetts Right to Know Act.
Pennsylvania Right To Know Components:
No components are subject to the Pennsylvania Right to Know Act.
New Jersey Right To Know Components:
No components are subject to the New Jersey Right to Know Act.
California Prop. 65 Components:
This product does not contain any chemicals known to the State of California to cause cancer, birth defects, or any other reproductive harm.
Other regulatory listings:
- The Australian Inventory of Industrial Chemicals: Chemical: 1,2-Ethanediamine, N-[(4-methoxyphenyl)methyl]-N',N'-dimethyl-N-2-pyrimidinyl-
15.2 Chemical safety assessment
A chemical safety assessment has not been carried out for this substance.
For research-use-only compounds, no CSA is required under REACH Annex I.
Revision Date: 2026/09/09
Further Information: The information provided is believed to be correct but is not exhaustive and should be used only as a guideline based on current knowledge. It does not represent a guarantee of the properties of the product. Selleck Chemicals Corporation and its Affiliates shall not be held liable for any damage resulting from handling or contact with the product.