Download SDS
CAS No.: 1318-93-0
Check the Sodium Montmorillonite product page for in-depth specifications, including solubility, stock solutions, MOA, and working concentrations.

Quick Safety Reference

🛡️ Hazard Overview

  • GHS Class: GHS07
  • Signal Word: Warning
  • Hazard Statements: H315; H319; H335

🧤 PPE Guidelines

  • Gloves: Chemical‑resistant gloves suggested
  • Eye Protection: Safety goggles suggested
  • Respirator: Dust respirator if dust occurs

❄️ Storage

  • Storage Temp: -20°C (-4°F) Keep dry

🚑 Emergency First Aid

  • For inhalation, skin, eye or ingestion exposure, please refer to full SDS Section 4.

GHS 16 Safety Standard Sections

Product identifier

  • Product Name: Sodium Montmorillonite
  • Catalog Number: E4469
  • CAS Number: 1318-93-0
  • IUPAC Name: Montmorillonite

Relevant identified uses and uses advised against

  • Identified uses: For research and development use only; laboratory chemicals; manufacture of substances.
  • Uses advised against: Not for pharmaceutical, household, or other unapproved uses.

Details of the supplier

  • Company: Selleck Chemicals
  • TollFree: +1 877 796-6397
  • Tel: +1 832 582-8158
  • Fax: +1 832 582-8590

Emergency telephone number

  • Emergency phone #: +1 832 582-8158

2.1 GHS classification in accordance with 29 CFR 1910 (OSHA HCS):
Skin irritation: Category 2. H315
Serious eye irritation: Category 2. H319
Specific target organ toxicity (single exposure): Category 3. H335

2.2 GHS Label elements, including precautionary statements
Hazard Pictogram(s):
GHS07
Signal Word:
Warning
Hazard statement(s):
H315: Causes skin irritation
H319: Causes serious eye irritation
H335: May cause respiratory irritation
Precautionary statement(s):
Prevention:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P264: Wash hands thoroughly after handling.
P264+P265: Wash hands thoroughly after handling. Do not touch eyes.
P271: Use only outdoors or in a well-ventilated area.
P280: Wear protective gloves/protective clothing/eye protection/face protection/hearing protection.
Response:
P302+P352: IF ON SKIN: wash with plenty of water.
P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351: IF IN EYES: Rinse cautiously with water for several minutes.
P319: Get medical help if you feel unwell.
P321: Specific treatment (see information on this label and safety datasheet)).
P332+P317: If skin irritation occurs: Get medical help.
P337+P317: If eye irritation persists: Get medical help.
P338: Remove contact lenses, if present and easy to do. Continue rinsing.
P362+P364: Take off contaminated clothing and wash it before reuse.
Storage:
P403+P233: Store in a well-ventilated place. Keep container tightly closed.
P405: Store locked up.
Disposal:
P501: P501 Dispose of contents/ container to an approved waste disposal plant.

2.3 Other hazards
None.

3.1 Substances
Product name: Sodium Montmorillonite
CAS Number: 1318-93-0
PubChem CID: 71586775
Molecular formula: Al2H2O12Si4
Molecular weight: 360.31 g/mol
IUPAC name: dialuminum;tetrakis(dioxosilane);tris(oxygen(2-));hydrate

3.2 Mixtures
Not applicable (pure substance).

4.1 Description of first aid measures
Inhalation: Fresh air, rest.
Skin contact: Rinse and then wash skin with water and soap.
Eye contact: Rinse with plenty of water (remove contact lenses if easily possible).
Ingestion: Rinse mouth. Do NOT induce vomiting unless directed by medical personnel. Seek medical attention.

4.2 Most important symptoms and effects, both acute and delayed
See Section 11 (Toxicological Information).

4.3 Indication of any immediate medical attention and special treatment needed
Treat symptomatically. Contact a poison control center or physician for severe exposure.

5.1 Extinguishing media
Suitable: Water spray, dry chemical, carbon dioxide (CO2), alcohol-resistant foam.
Unsuitable: None known.

5.2 Specific hazards arising from the substance or mixture
In case of fire in the surroundings: all extinguishing agents allowed.
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
In case of fire in the surroundings; all extinguishing agents allowed.
Wear self contained breathing apparatus for fire fighting if necessary.
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

5.3 Advice for firefighters
Wear self-contained breathing apparatus (SCBA) and full protective clothing.
Fight fire from upwind. Cool containers with water spray until fire is extinguished.

6.1 Personal precautions, protective equipment and emergency procedures
Wear appropriate personal protective equipment (see Section 8).
Avoid breathing dust/vapor. Ensure adequate ventilation.
Evacuate personnel to safe areas. Keep people away from and upwind of spill.

6.2 Environmental precautions
Prevent product from entering drains, waterways, or soil.
Contain spill with inert absorbent material.

6.3 Methods and materials for containment and cleaning up
Personal protection: particulate filter respirator adapted to the airborne concentration of the substance. Sweep spilled substance into covered containers. If appropriate, moisten first to prevent dusting. Wash away remainder with plenty of water.
Sweep up and shovel. Keep in suitable, closed containers for disposal.
Personal protection: particulate filter respirator adapted to the airborne concentration of the substance. Sweep spilled substance into covered containers. If appropriate, moisten first to prevent dusting. Wash away remainder with plenty of water.
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal.
SRP: At the time of review, criteria for land treatment or burial (sanitary landfill) disposal practices are subject to significant revision. Prior to implementing land disposal of waste residue (including waste sludge), consult with environmental regulatory agencies for guidance on acceptable disposal practices.
SRP: The most favorable course of action is to use an alternative chemical product with less inherent propensity for occupational harm/injury/toxicity or environmental contamination. Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in soil or water; effects on animal and plant life; and conformance with environmental and public health regulations.
SRP: Local exhaust ventilation should be applied wherever there is an incidence of point source emissions or dispersion of regulated contaminants in the work area. Ventilation control of the contaminant as close to its point of generation is both the most economical and safest method to minimize personnel exposure to airborne contaminants. Ensure that the local ventilation moves the contaminant away from the worker.
Avoid formation of dust and aerosols. Provide appropriate exhaust ventilation at places where dust is formed.

7.1 Precautions for safe handling
Dry.
Keep container tightly closed in a dry and well-ventilated place.
Bentonite should be stored in an airtight contaner in a cool, dry place.
Bentonite is hygroscopic, and sorption of atmospheric water should be avoided.
Keep container tightly closed in a dry and well-ventilated place.

7.2 Conditions for safe storage, including any incompatibilities
Dry.
Keep container tightly closed in a dry and well-ventilated place.
Bentonite should be stored in an airtight contaner in a cool, dry place.
Bentonite is hygroscopic, and sorption of atmospheric water should be avoided.
Keep container tightly closed in a dry and well-ventilated place.
Store away from incompatible materials (see Section 10).
[Note: Specific storage temperature not available in public databases. Refer to supplier Certificate of Analysis (COA) for exact storage conditions.]
Store in original container. Keep upright to prevent leakage.

8.1 Exposure controls
8.1.1 Occupational exposure limits (OEL)
OSHA PEL: Not established.
ACGIH TLV: Not established.
NIOSH REL: Not established.
No occupational exposure limit values are established for this substance.
Use the lowest feasible exposure level (ALARA principle).

8.1.2 Appropriate engineering controls
Use only in a chemical fume hood or with local exhaust ventilation.
Ensure adequate ventilation to keep airborne concentrations below exposure limits.

8.2 Individual protection measures
8.2.1 Eye/face protection
Wear chemical safety goggles.
8.2.2 Skin protection
Wear protective gloves. Recommended material: Nitrile rubber.
Wear suitable protective clothing (lab coat).
8.2.3 Respiratory protection
Use NIOSH-approved dust/mist respirator (N95 or higher) if ventilation is inadequate.
8.2.4 Thermal hazards
Not applicable.

9.1 Information on basic physical and chemical properties
a) Appearance: Dry Powder; Other Solid; Large Crystals; CBI; Liquid; Liquid; Other Solid; Dry Powder; Large Crystals; Other Solid
b) Odor: Odorless
c) Odor threshold: No data available
d) pH: In the presence of water, it forms translucent suspension with pH of around 9
e) Melting point/freezing point: >1200 °C
f) Initial boiling point and boiling range: No data available
g) Flash point: No data available
h) Evaporation rate: No data available
i) Flammability (solid, gas): No data available
j) Upper/lower flammability or explosive limits: No data available
k) Vapor pressure: No data available
l) Vapor density: No data available
m) Relative density: Relative density (water = 1): 2.5
n) Water solubility: Insoluble in water and common organic solvents
o) Partition coefficient: n-octanol/water: Log P: No data available
p) Auto-ignition temperature: No data available
q) Decomposition temperature: No data available
r) Viscosity: No data available
s) Explosive properties: No data available
t) Oxidizing properties: No data available

9.2 Other information
Topological Polar Surface Area (TPSA): 141 Ų
Complexity: 18

10.1 Reactivity
No specific reactivity hazards identified under normal handling conditions.

10.2 Chemical stability
Stable under recommended storage conditions.

10.3 Possibility of hazardous reactions
No hazardous reactions under normal conditions.

10.4 Conditions to avoid
Avoid heat, sparks, open flames, direct sunlight, and moisture.
Avoid strong oxidizing agents, strong acids, and strong bases.

10.5 Incompatible materials
Bentonite particles are negatively charged and flocculation occurs when electrolytes or positively charged suspensions are added. Bentonite is thus said to be incompatible with strong electrolytes...
Incompatibilities: acids and acid salts decrease the water-absorbing power and thus cause a breakdown of the magma.
Strong oxidizing agents

10.6 Hazardous decomposition products
Thermal decomposition may produce: Sulfur oxides (SOx).
See also Section 5 (Fire-fighting measures) for combustion products.

11.1 Information on toxicological effects
Acute toxicity:
No acute toxicity data available.
Skin corrosion/irritation:
Causes skin irritation (H315).
Serious eye damage/eye irritation:
Causes serious eye irritation (H319).
Respiratory or skin sensitization:
No data available.
Germ cell mutagenicity:
No data available.
Carcinogenicity:
No data available.
Reproductive toxicity:
No data available.
Specific target organ toxicity (single exposure):
No data available.
Specific target organ toxicity (repeated exposure):
No data available.
Aspiration hazard:
No data available.

11.2 Additional information
Exposure routes:
The substance can be absorbed into the body by inhalation.
Signs and symptoms of exposure:
Cough.
Redness.
Redness. Pain.
Data source: Hazardous Substances Data Bank (HSDB) via PubChem.

12.1 Toxicity
LC50; Species: Oncorhynchus mykiss (Rainbow Trout) weight 1 (0.3-2.9) g; Conditions: freshwater, static, 10.5 °C, pH 8.2, hardness 340 mg/L CaCO3; Concentration: 19000000 ug/L for 96 hr /formulation/
/AQUATIC SPECIES/ The present study was designed to investigate the effects of montmorillonite (MMT) on dietary Cd-induced oxidative damage in liver and kidney of carp (Carassius auratus). One hundred eighty carp were randomly divided into four groups and fed with a basal diet, a basal diet supplemented with 0.5% MMT, Cd-comtaminated basal diet (120 mg Cd/kg dry weight) and Cd-contaminated basal diet supplemented with 0.5% MMT, respectively. After 60 days, fish were sacrificed to measure malondialdehyde (MDA) content and antioxidative indices in liver and kidney. The results showed that the exposure of carp to dietary Cd caused decreases in glutathione peroxidase activity, catalase activity, superoxide dismutase activity, glutathione content and total antioxidant capacity level, while MMT supplemented in diet compensated Cd-induced decreases in above antioxidant indices to some extent in liver and kidney. As compared with the control group, increases in MDA content were observed in both measured tissues of carp exposed to dietary Cd, while MDA content decreased in carp exposed to Cd-contaminated basal diet supplemented with MMT in comparison with the Cd-contaminated group. It was suggested that MMT, when co-administered with Cd in diet, could alleviate dietary Cd-induced oxidativ

12.2 Persistence and degradability
No data available.

12.3 Bioaccumulative potential
No data available.

12.4 Mobility in soil
No data available.

12.5 Results of PBT and vPvB assessment
PBT/vPvB assessment not available.

12.6 Other adverse effects
No other adverse ecological effects identified.

13.1 Waste treatment methods
Waste Treatment Methods: Waste material must be disposed of in accordance with national and local regulations. Leave chemicals in original containers and do not mix with other waste. Handle uncleaned containers in the same manner as the product itself.

14.1 UN number
Not regulated as dangerous goods (research quantities typically exempt).

14.2 UN proper shipping name
Not subject to transport regulations (small quantities for research use).

14.3 Transport hazard class(es)
Not classified as dangerous goods for transport (research quantities).

14.4 Packing group
Not applicable (not regulated as dangerous goods in typical research quantities).

14.5 Environmental hazards
Marine pollutant: No (not classified as environmentally hazardous per GHS).

14.6 Special precautions for user
Transport in original packaging. Ensure containers are tightly sealed.
For bulk or commercial quantities, consult applicable transport regulations (DOT, IATA, IMDG).

14.7 Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not applicable.

15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
US EPA / TSCA: Subject to EPA TSCA regulations
EU ECHA / REACH: Not available in public databases.

SARA 302 Components:
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313 Components:
This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 Hazards:
Acute (short-term) health hazard

Massachusetts Right To Know Components:
This material contains components subject to the Massachusetts Right to Know Act. See Section 2 for hazard classification.
Pennsylvania Right To Know Components:
This material contains components subject to the Pennsylvania Right to Know Act. See Section 2 for hazard classification.
New Jersey Right To Know Components:
This material contains components subject to the New Jersey Right to Know Act. See Section 2 for hazard classification.

California Prop. 65 Components:
This product does not contain any chemicals known to the State of California to cause cancer, birth defects, or any other reproductive harm.

Other regulatory listings:
- The Australian Inventory of Industrial Chemicals: Chemical: Bentonite
- The Australian Inventory of Industrial Chemicals: Chemical: Montmorillonite
- EFSA Legal Basis: Regulation (EC) No 1831/2003 (amended)
- FIFRA Requirements: Residues of bentonite are exempted from the requirement of a tolerance when used in accordance with good agricultural practice as inert (or occasionally active) ingredients in pesticide formulations applied to growing crops or to raw agricultural commodities after harvest. Use: solid diluent, carrie
- FDA Requirements: Bentonite is an indirect food additive for use only as a component of adhesives.
Substance added directly to human food affirmed as generally recognized as safe (GRAS).
Bentonite used as a general purpose food additive in animal drugs, feeds, and related products is generally recognized as safe when

15.2 Chemical safety assessment
A chemical safety assessment has not been carried out for this substance.
For research-use-only compounds, no CSA is required under REACH Annex I.

Revision Date: 2026/09/08
Further Information: The information provided is believed to be correct but is not exhaustive and should be used only as a guideline based on current knowledge. It does not represent a guarantee of the properties of the product. Selleck Chemicals Corporation and its Affiliates shall not be held liable for any damage resulting from handling or contact with the product.

Note: Technical data last updated: Sep 1, 2026.