🛡️ Hazard Overview
- GHS Class: GHS02; GHS07; GHS08
- Signal Word: Danger
- Hazard Statements: H228; H302; H332; H371
🧤 PPE Guidelines
- Gloves: Chemical‑resistant gloves suggested
- Eye Protection: Safety goggles suggested
- Respirator: Dust respirator if dust occurs
❄️ Storage
- Storage Temp: -20°C (-4°F) Keep dry
🚑 Emergency First Aid
- For inhalation, skin, eye or ingestion exposure, please refer to full SDS Section 4.
Product identifier
- Product Name: (+)-Camphor
- Catalog Number: S4516
- CAS Number: 464-49-3
- IUPAC Name: (1R)-1,7,7-Trimethylbicyclo[2.2.1]heptan-2-one
Relevant identified uses and uses advised against
- Identified uses: For research and development use only; laboratory chemicals; manufacture of substances.
- Uses advised against: Not for pharmaceutical, household, or other unapproved uses.
Details of the supplier
- Company: Selleck Chemicals
- TollFree: +1 877 796-6397
- Tel: +1 832 582-8158
- Fax: +1 832 582-8590
Emergency telephone number
- Emergency phone #: +1 832 582-8158
2.1 GHS classification in accordance with 29 CFR 1910 (OSHA HCS):
Flammable solids: Category 1. H228
Acute toxicity (oral): Category 4. H302
Acute toxicity (inhalation): Category 4. H332
Specific target organ toxicity (single exposure): Category 2. H371
2.2 GHS Label elements, including precautionary statements
Hazard Pictogram(s):
Signal Word:
Danger
Hazard statement(s):
H228: Flammable solid
H302: Harmful if swallowed
H332: Harmful if inhaled
H371: May cause damage to organs
Precautionary statement(s):
Prevention:
P210: Keep away from heat, hot surface, sparks, open flames and other ignition sources. No smoking.
P240: Ground/bond container and receiving equipment.
P241: Use explosion-proof electrical/ventilating/lighting equipment.
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P264: Wash hands thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P280: Wear protective gloves/protective clothing/eye protection/face protection/hearing protection.
Response:
P301+P317: IF SWALLOWED: Get medical help.
P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P308+P316: IF exposed or concerned: Get emergency medical help immediately.
P317: Get emergency medical help.
P330: Rinse mouth.
P370+P378: In case of fire: Use water spray, dry chemical, carbon dioxide, or appropriate foam to extinguish.
Storage:
P405: Store locked up.
Disposal:
P501: P501 Dispose of contents/ container to an approved waste disposal plant.
2.3 Other hazards
None.
3.1 Substances
Product name: (+)-Camphor
CAS Number: 464-49-3
PubChem CID: 159055
Molecular formula: C10H16O
Molecular weight: 152.23 g/mol
IUPAC name: (1R,4R)-1,7,7-trimethylbicyclo[2.2.1]heptan-2-one
3.2 Mixtures
Not applicable (pure substance).
4.1 Description of first aid measures
Inhalation: INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to t
Skin contact: SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. IMMEDIATELY call a hospital or poison control center even if no symptoms (such as redness or irritation) develop. IMMEDIATELY transport the victim to a hospital for treatment after washing the affected areas.
Eye contact: EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.
Ingestion: INGESTION: DO NOT INDUCE VOMITING. Corrosive chemicals will destroy the membranes of the mouth, throat, and esophagus and, in addition, have a high risk of being aspirated into the victim's lungs during vomiting which increases the medical problems. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. IMMEDIATELY transport the victim to a hospital. If the victim is convulsing or unconscious, d
4.2 Most important symptoms and effects, both acute and delayed
See Section 11 (Toxicological Information).
4.3 Indication of any immediate medical attention and special treatment needed
Treat symptomatically. Contact a poison control center or physician for severe exposure.
5.1 Extinguishing media
Suitable: Dry chemical, carbon dioxide (CO2), alcohol-resistant foam, water spray.
Unsuitable: High-pressure water jet (may spread fire).
5.2 Specific hazards arising from the substance or mixture
Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)
5.3 Advice for firefighters
Wear self-contained breathing apparatus (SCBA) and full protective clothing.
Fight fire from upwind. Cool containers with water spray until fire is extinguished.
Flash point: 148 °F (NTP, 1992)
6.1 Personal precautions, protective equipment and emergency procedures
Wear appropriate personal protective equipment (see Section 8).
Avoid breathing dust/vapor. Ensure adequate ventilation.
Evacuate personnel to safe areas. Keep people away from and upwind of spill.
6.2 Environmental precautions
Prevent product from entering drains, waterways, or soil.
Contain spill with inert absorbent material.
6.3 Methods and materials for containment and cleaning up
· CALL 911. Then call emergency response telephone number on shipping paper. If shipping paper not available or no answer, refer to appropriate telephone number listed on the inside back cover.
· Keep unauthorized personnel away.
· Stay upwind, uphill and/or upstream.
· ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area.
· Do not touch or walk through spilled material.
Small Dry Spill
· With clean shovel, place material into clean, dry container and cover loosely; move containers from spill area.
Large Spill
· Wet down with water and dike for later disposal.
· Prevent entry into waterways, sewers, basements or confined areas.
Excerpt from ERG Guide 133 [Flammable Solids]:
IMMEDIATE PRECAUTIONARY MEASURE: Isolate spill or leak area for at least 25 meters (75 feet) in all directions.
LARGE SPILL: Consider initial downwind evacuation for at least 100 meters (330 feet).
FIRE: If tank, rail tank car or highway tank is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2024)
Immediate precautionary measure
· Isolate spill or leak area for at least 25 meters (75 feet) in all directions.
Large Spill
· Consider initial downwind evacuation for at least 100 meters (330 feet).
Fire
· If tank, rail tank car or highway tank is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions.
7.1 Precautions for safe handling
SMALL SPILLS AND LEAKAGE: Should a spill occur while you are handling this chemical, FIRST REMOVE ALL SOURCES OF IGNITION, then you should dampen the solid spill material with 60-70% ethanol and transfer the dampened material to a suitable container. Use absorbent paper dampened with 60-70% ethanol to pick up any remaining material. Seal the absorbent paper, and any of your clothes, which may be contaminated, in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with 60-70% ethanol followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.
STORAGE PRECAUTIONS: You should protect this chemical from exposure to light. Keep the container tightly closed under an inert atmosphere, and store under refrigerated temperatures. (NTP, 1992)
Keep away from heat, sparks, and open flames. Use explosion-proof equipment.
7.2 Conditions for safe storage, including any incompatibilities
Store in a cool, dry, well-ventilated area. Keep container tightly closed.
Store away from incompatible materials (see Section 10).
Protect from light and moisture.
Recommended storage (industry convention for research compounds): -20°C for long-term storage; 2-8°C for short-term use and transport.
[Note: This is a general industry recommendation. Always verify exact storage conditions with the supplier Certificate of Analysis (COA).]
8.1 Exposure controls
8.1.1 Occupational exposure limits (OEL)
OSHA PEL: Not established.
ACGIH TLV: Not established.
NIOSH REL: Not established.
No occupational exposure limit values are established for this substance.
Use the lowest feasible exposure level (ALARA principle).
8.1.2 Appropriate engineering controls
Use in a well-ventilated area. Chemical fume hood recommended for powder handling.
8.2 Individual protection measures
8.2.1 Eye/face protection
Wear safety glasses with side shields.
8.2.2 Skin protection
Wear protective gloves. Recommended material: Nitrile rubber.
Wear suitable protective clothing (lab coat).
8.2.3 Respiratory protection
Use NIOSH-approved dust/mist respirator (N95 or higher) if ventilation is inadequate.
8.2.4 Thermal hazards
Not applicable.
9.1 Information on basic physical and chemical properties
a) Appearance: D-camphor appears as colorless or white crystals. Sublimes. Flash point 149 °F. Burns readily with a bright, smoky flame. Penetrating aromatic odor. Pungent, aromatic taste followed by a sensation of cold. (NTP, 1992)
b) Odor: No data available
c) Odor threshold: No data available
d) pH: No data available
e) Melting point/freezing point: 353.8 °F (NTP, 1992)
f) Initial boiling point and boiling range: 399 °F at 760 mmHg (NTP, 1992)
g) Flash point: 148 °F (NTP, 1992)
h) Evaporation rate: No data available
i) Flammability (solid, gas): No data available
j) Upper/lower flammability or explosive limits: No data available
k) Vapor pressure: 1 mmHg at 106.7 °F ; 5 mmHg at 155.5 °F (NTP, 1992)
l) Vapor density: No data available
m) Relative density: 0.992 at 77 °F (NTP, 1992) - Less dense than water; will float
n) Water solubility: less than 1 mg/mL at 59 °F (NTP, 1992)
o) Partition coefficient: n-octanol/water: Log P (n-octanol/water): 2.2
p) Auto-ignition temperature: 871 °F (NTP, 1992)
q) Decomposition temperature: No data available
r) Viscosity: No data available
s) Explosive properties: No data available
t) Oxidizing properties: No data available
9.2 Other information
Topological Polar Surface Area (TPSA): 17.1 Ų
Complexity: 217
10.1 Reactivity
No specific reactivity hazards identified under normal handling conditions.
10.2 Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
No hazardous reactions under normal conditions.
10.4 Conditions to avoid
Avoid heat, sparks, open flames, direct sunlight, and moisture.
10.5 Incompatible materials
Strong oxidizing agents, strong acids, strong bases.
10.6 Hazardous decomposition products
Thermal decomposition may produce: Carbon monoxide (CO), Carbon dioxide (CO₂).
See also Section 5 (Fire-fighting measures) for combustion products.
11.1 Information on toxicological effects
Acute toxicity:
No acute toxicity data available.
Skin corrosion/irritation:
No data available.
Serious eye damage/eye irritation:
No data available.
Respiratory or skin sensitization:
No data available.
Germ cell mutagenicity:
No data available.
Carcinogenicity:
No data available.
Reproductive toxicity:
No data available.
Specific target organ toxicity (single exposure):
H371
Specific target organ toxicity (repeated exposure):
No data available.
Aspiration hazard:
No data available.
11.2 Additional information
No additional toxicological information available.
12.1 Toxicity
No ecotoxicity data available.
12.2 Persistence and degradability
No data available.
12.3 Bioaccumulative potential
Log P (n-octanol/water): 2.2
Low potential for bioaccumulation (Log P < 3).
12.4 Mobility in soil
No data available.
12.5 Results of PBT and vPvB assessment
PBT/vPvB assessment not available.
12.6 Other adverse effects
No other adverse ecological effects identified.
13.1 Waste treatment methods
Waste Treatment Methods: Waste material must be disposed of in accordance with national and local regulations. Leave chemicals in original containers and do not mix with other waste. Handle uncleaned containers in the same manner as the product itself.
14.1 UN number
UN 2717
14.2 UN proper shipping name
Consult official transport regulations (DOT/IATA/IMDG) for proper shipping name.
14.3 Transport hazard class(es)
Consult official transport regulations (DOT/IATA/IMDG) for hazard classification.
DOT label: Flammable Solid
14.4 Packing group
Consult official transport regulations (DOT/IATA/IMDG) for packing group assignment.
14.5 Environmental hazards
Marine pollutant: No (not classified as environmentally hazardous per GHS).
14.6 Special precautions for user
Transport in original packaging. Ensure containers are tightly sealed.
For bulk or commercial quantities, consult applicable transport regulations (DOT, IATA, IMDG).
DOT Emergency Response Guide (ERG) number: 133
14.7 Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not applicable.
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
US EPA / TSCA: Not available in public databases.
EU ECHA / REACH: Registered (REACH Active)
SARA 302 Components:
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313 Components:
This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 Hazards:
Acute (short-term) health hazard
Fire hazard
Massachusetts Right To Know Components:
This material contains components subject to the Massachusetts Right to Know Act. See Section 2 for hazard classification.
Pennsylvania Right To Know Components:
This material contains components subject to the Pennsylvania Right to Know Act. See Section 2 for hazard classification.
New Jersey Right To Know Components:
This material contains components subject to the New Jersey Right to Know Act. See Section 2 for hazard classification.
California Prop. 65 Components:
This product does not contain any chemicals known to the State of California to cause cancer, birth defects, or any other reproductive harm.
Other regulatory listings:
- The Australian Inventory of Industrial Chemicals: Chemical: Bicyclo[2.2.1]heptan-2-one, 1,7,7-trimethyl-, (1R)-
- EFSA Legal Basis: Regulation (EC) No 1831/2003 (amended)
15.2 Chemical safety assessment
A chemical safety assessment has not been carried out for this substance.
For research-use-only compounds, no CSA is required under REACH Annex I.
Revision Date: 2026/09/09
Further Information: The information provided is believed to be correct but is not exhaustive and should be used only as a guideline based on current knowledge. It does not represent a guarantee of the properties of the product. Selleck Chemicals Corporation and its Affiliates shall not be held liable for any damage resulting from handling or contact with the product.