🛡️ Hazard Overview
- GHS Class: GHS07
- Signal Word: Warning
- Hazard Statements: H227; H319; H320
🧤 PPE Guidelines
- Gloves: Chemical‑resistant gloves suggested
- Eye Protection: Safety goggles suggested
- Respirator: Dust respirator if dust occurs
❄️ Storage
- Storage Temp: -20°C (-4°F) Keep dry
🚑 Emergency First Aid
- For inhalation, skin, eye or ingestion exposure, please refer to full SDS Section 4.
Product identifier
- Product Name: Ethyl acetoacetate
- Catalog Number: S6024
- CAS Number: 141-97-9
- IUPAC Name: Butanoic acid, 3-oxo-, ethyl ester
Relevant identified uses and uses advised against
- Identified uses: For research and development use only; laboratory chemicals; manufacture of substances.
- Uses advised against: Not for pharmaceutical, household, or other unapproved uses.
Details of the supplier
- Company: Selleck Chemicals
- TollFree: +1 877 796-6397
- Tel: +1 832 582-8158
- Fax: +1 832 582-8590
Emergency telephone number
- Emergency phone #: +1 832 582-8158
2.1 GHS classification in accordance with 29 CFR 1910 (OSHA HCS):
Flammable liquids: Category 4. H227
Serious eye irritation: Category 2. H319
Eye irritation: Category 2. H320
2.2 GHS Label elements, including precautionary statements
Hazard Pictogram(s):
![]()
Signal Word:
Warning
Hazard statement(s):
H227: Combustible liquid
H319: Causes serious eye irritation
H320: Causes eye irritation
Precautionary statement(s):
Prevention:
P210: Keep away from heat, hot surface, sparks, open flames and other ignition sources. No smoking.
P264+P265: Wash hands thoroughly after handling. Do not touch eyes.
P280: Wear protective gloves/protective clothing/eye protection/face protection/hearing protection.
Response:
P305+P351: IF IN EYES: Rinse cautiously with water for several minutes.
P337+P317: If eye irritation persists: Get medical help.
P338: Remove contact lenses, if present and easy to do. Continue rinsing.
P370+P378: In case of fire: Use water spray, dry chemical, carbon dioxide, or appropriate foam to extinguish.
Storage:
P403: Store in a well-ventilated place.
Disposal:
P501: P501 Dispose of contents/ container to an approved waste disposal plant.
2.3 Other hazards
None.
3.1 Substances
Product name: Ethyl acetoacetate
CAS Number: 141-97-9
PubChem CID: 8868
Molecular formula: C6H10O3
Molecular weight: 130.14 g/mol
IUPAC name: ethyl 3-oxobutanoate
3.2 Mixtures
Not applicable (pure substance).
4.1 Description of first aid measures
Inhalation: Fresh air, rest.
Skin contact: Remove contaminated clothes. Rinse and then wash skin with water and soap.
Eye contact: First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.
Ingestion: Rinse mouth. Give one or two glasses of water to drink. Rest.
4.2 Most important symptoms and effects, both acute and delayed
See Section 11 (Toxicological Information).
4.3 Indication of any immediate medical attention and special treatment needed
Treat symptomatically. Contact a poison control center or physician for severe exposure.
5.1 Extinguishing media
Suitable: Water spray, dry chemical, carbon dioxide (CO2), alcohol-resistant foam.
Unsuitable: None known.
5.2 Specific hazards arising from the substance or mixture
Excerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]:
CAUTION: The majority of these products have a very low flash point. Use of water spray when fighting fire may be inefficient. CAUTION: For mixtures containing alcohol or polar solvent, alcohol-resistant foam may be more effective.
SMALL FIRE: Dry chemical, CO2, water spray or regular foam. If regular foam is ineffective or unavailable, use alcohol-resistant foam.
LARGE FIRE: Water spray, fog or regular foam. If regular foam is ineffective or unavailable, use alcohol-resistant foam. Avoid aiming straight or solid streams directly onto the product. If it can be done safely, move undamaged containers away from the area around the fire.
FIRE INVOLVING TANKS, RAIL TANK CARS OR HIGHWAY TANKS: Fight fire from maximum distance or use unmanned master stream devices or monitor nozzles. Cool containers with flooding quantities of water until well after fire is out. For petroleum crude oil, do not spray water directly into a breached tank car. This can lead to a dangerous boil over. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks in direct contact with flames. For massive fire, use unmanned master stream devices or monitor nozzles; if this is impossible, withdraw from area and let fire burn. (ERG, 2024)
Use water spray, powder, foam, carbon dioxide.
USE ALCOHOL FOAM, CARBON DIOXIDE, DRY CHEMICAL.
5.3 Advice for firefighters
Wear self-contained breathing apparatus (SCBA) and full protective clothing.
Fight fire from upwind. Cool containers with water spray until fire is extinguished.
Flash point: 135 °F (USCG, 1999)
6.1 Personal precautions, protective equipment and emergency procedures
Wear appropriate personal protective equipment (see Section 8).
Avoid breathing dust/vapor. Ensure adequate ventilation.
Evacuate personnel to safe areas. Keep people away from and upwind of spill.
6.2 Environmental precautions
Prevent product from entering drains, waterways, or soil.
Contain spill with inert absorbent material.
6.3 Methods and materials for containment and cleaning up
Excerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]:
IMMEDIATE PRECAUTIONARY MEASURE: Isolate spill or leak area for at least 50 meters (150 feet) in all directions.
LARGE SPILL: Consider initial downwind evacuation for at least 300 meters (1000 feet).
FIRE: If tank, rail tank car or highway tank is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2024)
Collect leaking and spilled liquid in sealable containers as far as possible. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations. Wash away remainder with plenty of water.
7.1 Precautions for safe handling
Excerpt from ERG Guide 128 [Flammable Liquids (Water-Immiscible)]:
ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area. All equipment used when handling the product must be grounded. Do not touch or walk through spilled material. Stop leak if you can do it without risk. Prevent entry into waterways, sewers, basements or confined areas. A vapor-suppressing foam may be used to reduce vapors. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. Use clean, non-sparking tools to collect absorbed material.
LARGE SPILL: Dike far ahead of liquid spill for later disposal. Water spray may reduce vapor, but may not prevent ignition in closed spaces. (ERG, 2024)
Separated from strong oxidants. Ventilation along the floor. Well closed.
7.2 Conditions for safe storage, including any incompatibilities
Separated from strong oxidants. Ventilation along the floor. Well closed.
Store away from incompatible materials (see Section 10).
[Note: Specific storage temperature not available in public databases. Refer to supplier Certificate of Analysis (COA) for exact storage conditions.]
Store in original container. Keep upright to prevent leakage.
8.1 Exposure controls
8.1.1 Occupational exposure limits (OEL)
OSHA PEL: Not established.
ACGIH TLV: Not established.
NIOSH REL: Not established.
No occupational exposure limit values are established for this substance.
Use the lowest feasible exposure level (ALARA principle).
8.1.2 Appropriate engineering controls
Use in a well-ventilated area. Chemical fume hood recommended for powder handling.
8.2 Individual protection measures
8.2.1 Eye/face protection
Wear chemical safety goggles.
8.2.2 Skin protection
Wear protective gloves. Recommended material: Nitrile rubber.
Wear suitable protective clothing (lab coat).
8.2.3 Respiratory protection
Respiratory protection usually not required under normal use with adequate ventilation.
Use N95 respirator for large-scale powder handling.
8.2.4 Thermal hazards
Not applicable.
9.1 Information on basic physical and chemical properties
a) Appearance: Ethyl acetoacetate appears as a colorless liquid with a fruity odor. Flash point 185 °F. Boiling point 365 °F. May cause adverse health effects if ingested or inhaled. May irritate to skin, eyes and mucous membranes. Used in organic synthesis and in lacquers and paints.
b) Odor: PLEASANT GREEN, FRUITY, RUM ODOR
c) Odor threshold: No data available
d) pH: No data available
e) Melting point/freezing point: less than -112 °F (USCG, 1999)
f) Initial boiling point and boiling range: 363 °F at 760 mmHg (USCG, 1999)
g) Flash point: 135 °F (USCG, 1999)
h) Evaporation rate: No data available
i) Flammability (solid, gas): No data available
j) Upper/lower flammability or explosive limits: No data available
k) Vapor pressure: 0.78 [mmHg]
l) Vapor density: No data available
m) Relative density: 1.028 at 68 °F (USCG, 1999) - Denser than water; will sink
n) Water solubility: SOL IN ABOUT 35 PARTS WATER
o) Partition coefficient: n-octanol/water: Log P (n-octanol/water): 0.2
p) Auto-ignition temperature: 563 °F (USCG, 1999)
q) Decomposition temperature: No data available
r) Viscosity: No data available
s) Explosive properties: No data available
t) Oxidizing properties: No data available
9.2 Other information
Topological Polar Surface Area (TPSA): 43.4 Ų
Complexity: 117
10.1 Reactivity
No specific reactivity hazards identified under normal handling conditions.
10.2 Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
No hazardous reactions under normal conditions.
10.4 Conditions to avoid
Avoid heat, sparks, open flames, direct sunlight, and moisture.
10.5 Incompatible materials
Strong oxidizing agents, strong acids, strong bases.
10.6 Hazardous decomposition products
Thermal decomposition may produce: Carbon monoxide (CO), Carbon dioxide (CO₂).
See also Section 5 (Fire-fighting measures) for combustion products.
11.1 Information on toxicological effects
Acute toxicity:
No acute toxicity data available.
Skin corrosion/irritation:
No data available.
Serious eye damage/eye irritation:
Causes serious eye irritation (H319).
Respiratory or skin sensitization:
No data available.
Germ cell mutagenicity:
No data available.
Carcinogenicity:
No data available.
Reproductive toxicity:
No data available.
Specific target organ toxicity (single exposure):
No data available.
Specific target organ toxicity (repeated exposure):
No data available.
Aspiration hazard:
No data available.
11.2 Additional information
Exposure routes:
The substance can be absorbed into the body by inhalation.
Signs and symptoms of exposure:
Cough. Sore throat.
Redness.
Redness. Pain.
Data source: Hazardous Substances Data Bank (HSDB) via PubChem.
12.1 Toxicity
NATURALLY OCCURRING IN STRAWBERRY...
12.2 Persistence and degradability
No data available.
12.3 Bioaccumulative potential
Log P (n-octanol/water): 0.2
Low potential for bioaccumulation (Log P < 3).
12.4 Mobility in soil
No data available.
12.5 Results of PBT and vPvB assessment
PBT/vPvB assessment not available.
12.6 Other adverse effects
No other adverse ecological effects identified.
13.1 Waste treatment methods
Waste Treatment Methods: Waste material must be disposed of in accordance with national and local regulations. Leave chemicals in original containers and do not mix with other waste. Handle uncleaned containers in the same manner as the product itself.
14.1 UN number
Not regulated as dangerous goods (research quantities typically exempt).
14.2 UN proper shipping name
Not subject to transport regulations (small quantities for research use).
14.3 Transport hazard class(es)
Not classified as dangerous goods for transport (research quantities).
DOT label: Flammable Liquid
14.4 Packing group
Not applicable (not regulated as dangerous goods in typical research quantities).
14.5 Environmental hazards
Marine pollutant: No (not classified as environmentally hazardous per GHS).
14.6 Special precautions for user
Transport in original packaging. Ensure containers are tightly sealed.
For bulk or commercial quantities, consult applicable transport regulations (DOT, IATA, IMDG).
14.7 Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not applicable.
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
US EPA / TSCA: Subject to EPA TSCA regulations
EU ECHA / REACH: Registered (REACH Active)
SARA 302 Components:
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313 Components:
This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 Hazards:
Acute (short-term) health hazard
Fire hazard
Massachusetts Right To Know Components:
This material contains components subject to the Massachusetts Right to Know Act. See Section 2 for hazard classification.
Pennsylvania Right To Know Components:
This material contains components subject to the Pennsylvania Right to Know Act. See Section 2 for hazard classification.
New Jersey Right To Know Components:
This material contains components subject to the New Jersey Right to Know Act. See Section 2 for hazard classification.
California Prop. 65 Components:
This product does not contain any chemicals known to the State of California to cause cancer, birth defects, or any other reproductive harm.
Other regulatory listings:
- The Australian Inventory of Industrial Chemicals: Chemical: Butanoic acid, 3-oxo-, ethyl ester
- EFSA Legal Basis: Regulation (EC) No 1831/2003 (amended)
- FDA Requirements: FDA 121.1164.
FDA 172.515. FLAVOR USEFUL IN STRAWBERRY, FRUIT FLAVORS.
15.2 Chemical safety assessment
A chemical safety assessment has not been carried out for this substance.
For research-use-only compounds, no CSA is required under REACH Annex I.
Revision Date: 2026/09/09
Further Information: The information provided is believed to be correct but is not exhaustive and should be used only as a guideline based on current knowledge. It does not represent a guarantee of the properties of the product. Selleck Chemicals Corporation and its Affiliates shall not be held liable for any damage resulting from handling or contact with the product.