🛡️ Hazard Overview
- GHS Class: GHS05; GHS06; GHS07; GHS08; GHS09
- Signal Word: Danger
- Hazard Statements: H301; H302; H314; H315; H317; H318; H319; H335; H341; H361; H370; H372; H373; H400; H410
🧤 PPE Guidelines
- Gloves: Chemical‑resistant gloves suggested
- Eye Protection: Safety goggles suggested
- Respirator: Dust respirator if dust occurs
❄️ Storage
- Storage Temp: -20°C (-4°F) Keep dry
🚑 Emergency First Aid
- For inhalation, skin, eye or ingestion exposure, please refer to full SDS Section 4.
Product identifier
- Product Name: Cupric sulfate
- Catalog Number: E0162
- CAS Number: 7758-98-7
- IUPAC Name: Sulfuric acid copper(2+) salt (1:1)
Relevant identified uses and uses advised against
- Identified uses: For research and development use only; laboratory chemicals; manufacture of substances.
- Uses advised against: Not for pharmaceutical, household, or other unapproved uses.
Details of the supplier
- Company: Selleck Chemicals
- TollFree: +1 877 796-6397
- Tel: +1 832 582-8158
- Fax: +1 832 582-8590
Emergency telephone number
- Emergency phone #: +1 832 582-8158
2.1 GHS classification in accordance with 29 CFR 1910 (OSHA HCS):
Acute toxicity (oral): Category 3. H301
Acute toxicity (oral): Category 4. H302
Skin corrosion: Category 1. H314
Skin irritation: Category 2. H315
Skin sensitization: Category 1. H317
Serious eye damage: Category 1. H318
Serious eye irritation: Category 2. H319
Specific target organ toxicity (single exposure): Category 3. H335
Germ cell mutagenicity: Category 2. H341
Reproductive toxicity: Category 2. H361
Specific target organ toxicity (single exposure): Category 1. H370
Specific target organ toxicity (repeated exposure): Category 1. H372
Specific target organ toxicity (repeated exposure): Category 2. H373
Acute aquatic toxicity: Category 1. H400
Chronic aquatic toxicity: Category 1. H410
2.2 GHS Label elements, including precautionary statements
Hazard Pictogram(s):
![]()
Signal Word:
Danger
Hazard statement(s):
H301: Toxic if swallowed
H302: Harmful if swallowed
H314: Causes severe skin burns and eye damage
H315: Causes skin irritation
H317: May cause an allergic skin reaction
H318: Causes serious eye damage
H319: Causes serious eye irritation
H335: May cause respiratory irritation
H341: Suspected of causing genetic defects
H361: Suspected of damaging fertility or the unborn child
H370: Causes damage to organs
H372: Causes damage to organs through prolonged or repeated exposure
H373: May causes damage to organs through prolonged or repeated exposure
H400: Very toxic to aquatic life
H410: Very toxic to aquatic life with long lasting effects
Precautionary statement(s):
Prevention:
P203: Obtain, read and follow all safety instructions before use.
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P264: Wash hands thoroughly after handling.
P264+P265: Wash hands thoroughly after handling. Do not touch eyes.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P272: Contaminated work clothing should not be allowed out of the workplace.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection/hearing protection.
Response:
P301+P316: IF SWALLOWED: Get emergency medical help immediately.
P301+P317: IF SWALLOWED: Get medical help.
P301+P330: IF SWALLOWED: Rinse mouth.
P302+P352: IF ON SKIN: wash with plenty of water.
P302+P361: IF ON SKIN: Take off immediately all contaminated clothing.
P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351: IF IN EYES: Rinse cautiously with water for several minutes.
P305+P354: IF IN EYES: Immediately rinse with water for several minutes.
P308+P316: IF exposed or concerned: Get emergency medical help immediately.
P316: Get emergency medical help immediately.
P317: Get emergency medical help.
P318: if exposed or concerned, get medical advice.
P319: Get medical help if you feel unwell.
P321: Specific treatment (see information on this label and safety datasheet)).
P330: Rinse mouth.
P331: Do NOT induce vomiting.
P332+P317: If skin irritation occurs: Get medical help.
P333+P317: If skin irritation or rash occurs: Get medical help.
P337+P317: If eye irritation persists: Get medical help.
P338: Remove contact lenses, if present and easy to do. Continue rinsing.
P354: Immediately rinse with water for several minutes.
P362+P364: Take off contaminated clothing and wash it before reuse.
P363: Wash contaminated clothing before reuse.
P391: Collect spillage.
Storage:
P403+P233: Store in a well-ventilated place. Keep container tightly closed.
P405: Store locked up.
Disposal:
P501: P501 Dispose of contents/ container to an approved waste disposal plant.
2.3 Other hazards
None.
3.1 Substances
Product name: Cupric sulfate
CAS Number: 7758-98-7
PubChem CID: 24462
Molecular formula: CuO4S
Molecular weight: 159.61 g/mol
IUPAC name: copper sulfate
3.2 Mixtures
Not applicable (pure substance).
4.1 Description of first aid measures
Inhalation: Fresh air, rest.
Skin contact: Rinse skin with plenty of water or shower. Refer for medical attention if skin irritation occurs.
Eye contact: First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.
Ingestion: Do NOT induce vomiting. Give one or two glasses of water to drink. Refer for medical attention .
4.2 Most important symptoms and effects, both acute and delayed
See Section 11 (Toxicological Information).
4.3 Indication of any immediate medical attention and special treatment needed
Treat symptomatically. Contact a poison control center or physician for severe exposure.
5.1 Extinguishing media
Suitable: Water spray, dry chemical, carbon dioxide (CO2), alcohol-resistant foam.
Unsuitable: None known.
5.2 Specific hazards arising from the substance or mixture
Excerpt from ERG Guide 151 [Substances - Toxic (Non-Combustible)]:
SMALL FIRE: Dry chemical, CO2 or water spray.
LARGE FIRE: Water spray, fog or regular foam. If it can be done safely, move undamaged containers away from the area around the fire. Dike runoff from fire control for later disposal. Avoid aiming straight or solid streams directly onto the product.
FIRE INVOLVING TANKS, RAIL TANK CARS OR HIGHWAY TANKS: Fight fire from maximum distance or use unmanned master stream devices or monitor nozzles. Do not get water inside containers. Cool containers with flooding quantities of water until well after fire is out. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks in direct contact with flames. For massive fire, use unmanned master stream devices or monitor nozzles; if this is impossible, withdraw from area and let fire burn. (ERG, 2024)
In case of fire in the surroundings, use appropriate extinguishing media.
If material involved in fire: Extinguish fire using agent suitable for type of surrounding fire (material itself does not burn or burns with difficulty).
5.3 Advice for firefighters
Wear self-contained breathing apparatus (SCBA) and full protective clothing.
Fight fire from upwind. Cool containers with water spray until fire is extinguished.
6.1 Personal precautions, protective equipment and emergency procedures
Wear appropriate personal protective equipment (see Section 8).
Avoid breathing dust/vapor. Ensure adequate ventilation.
Evacuate personnel to safe areas. Keep people away from and upwind of spill.
WARNING: Highly toxic — only trained personnel should handle spills.
6.2 Environmental precautions
Prevent product from entering drains, waterways, or soil.
Contain spill with inert absorbent material.
6.3 Methods and materials for containment and cleaning up
Excerpt from ERG Guide 151 [Substances - Toxic (Non-Combustible)]:
IMMEDIATE PRECAUTIONARY MEASURE: Isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids.
SPILL: Increase the immediate precautionary measure distance, in the downwind direction, as necessary.
FIRE: If tank, rail tank car or highway tank is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2024)
Personal protection: particulate filter respirator adapted to the airborne concentration of the substance, protective clothing, protective gloves and safety goggles. Do NOT let this chemical enter the environment. Sweep spilled substance into covered containers. If appropriate, moisten first to prevent dusting. Then store and dispose of according to local regulations.
Environmental concerns - land spill: Dig a pit, lagoon,or holding area to contain liquid or solid material. /SRP: If time permits, pits, ponds, lagoons, soak holes, or holding areas should be sealed with an impermeable flexible membrane liner./ Cover solids with a plastic sheet to prevent dissolving in rain or fire fighting water.
Environmental concerns - water spill: Neutralize with agricultural lime (CaO), crushed limestone (CaCO3), or sodium bicarbonate (NaHCO3). Adjust pH to neutral (pH= 7). Use mechanical dredges or lifts to remove immobilized masses of pollutants and precipitates.
SRP: At the time of review, criteria for land treatment or burial (sanitary landfill) disposal practices are subject to significant revision. Prior to implementing land disposal of waste residue (including waste sludge), consult with environmental regulatory agencies for guidance on acceptable disposal practices.
Group III Containers (both combustible and non-combustible) that previously held organic mercury, lead, cadmium, arsenic, or inorganic pesticides should be triple rinsed, punctured and disposed of in a sanitary landfill. Non-rinsed containers should be encapsulated and buried at a specially designated landfill site. /Organic mercury, lead, cadmium, arsenic, or inorganic pesticides/
The following wastewater treatment technologies have been investigated for copper (II) sulfate: activated carbon.
Add slowly to a large container of water. Stir in slight excess of soda ash. Let stand for 24 hr. Decant or siphon into another container and neutralize with 6 M HCl. ... The sludge may be added to landfill. Recommendable methods: Precipitation, solidification, & landfill. Peer-review: ... Copper can be recovered by cation exchange. (Peer-review conclusions of an IRPTC expert consultation (May 1985))
Personnel protection: Keep upwind. ... Avoid breathing vapors or dusts. Wash away any material which may have contacted the body with copious amounts of water or soap and water.
If material not involved in fire: Keep material out of water sources & sewers. Build dikes to contain flow as necessary.
SRP: Local exhaust ventilation should be applied wherever there is an incidence of point source emissions or dispersion of regulated contaminants in the work area. Ventilation control of the contaminant as close to its point of generation is both the most economical and safest method to minimize personnel exposure to airborne contaminants.
SRP: Contaminated protective clothing should be segregated in such a manner so that there is no direct personal contact by personnel who handle, dispose, or clean the clothing. Quality assurance to ascertain the completeness of the cleaning procedures should be implemented before the decontaminated protective clothing is returned for reuse by the workers.
7.1 Precautions for safe handling
Excerpt from ERG Guide 151 [Substances - Toxic (Non-Combustible)]:
Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Stop leak if you can do it without risk. Prevent entry into waterways, sewers, basements or confined areas. Cover with plastic sheet to prevent spreading. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. DO NOT GET WATER INSIDE CONTAINERS. For solids, prevent dust cloud and avoid inhalation of dust. (ERG, 2024)
Well closed. Dry. Store only in original container. Store in an area without drain or sewer access.
KEEP TIGHTLY CLOSED.
7.2 Conditions for safe storage, including any incompatibilities
Well closed. Dry. Store only in original container. Store in an area without drain or sewer access.
KEEP TIGHTLY CLOSED.
Store away from incompatible materials (see Section 10).
[Note: Specific storage temperature not available in public databases. Refer to supplier Certificate of Analysis (COA) for exact storage conditions.]
8.1 Exposure controls
8.1.1 Occupational exposure limits (OEL)
(respirable fraction): 0.01 mg/m
8.1.2 Appropriate engineering controls
Use only in a chemical fume hood or with local exhaust ventilation.
Ensure adequate ventilation to keep airborne concentrations below exposure limits.
8.2 Individual protection measures
8.2.1 Eye/face protection
Wear chemical safety goggles and face shield.
8.2.2 Skin protection
Wear protective gloves. Recommended material: Nitrile rubber.
Wear suitable protective clothing (lab coat).
8.2.3 Respiratory protection
Use NIOSH-approved dust/mist respirator (N95 or higher) if ventilation is inadequate.
8.2.4 Thermal hazards
Not applicable.
9.1 Information on basic physical and chemical properties
a) Appearance: Cupric sulfate appears as a white or off-white solid. Melting point 200 °C with decomposition. Non-combustible.
b) Odor: Pleasant odor
c) Odor threshold: No data available
d) pH: No data available
e) Melting point/freezing point: 590 °C decomp
f) Initial boiling point and boiling range: 650 °C (decomp to cupric oxide)
g) Flash point: No data available
h) Evaporation rate: No data available
i) Flammability (solid, gas): No data available
j) Upper/lower flammability or explosive limits: No data available
k) Vapor pressure: No data available
l) Vapor density: No data available
m) Relative density: 2.29 at 59 °F (USCG, 1999) - Denser than water; will sink
n) Water solubility: Very soluble in hot water, soluble cold water
o) Partition coefficient: n-octanol/water: Log P: No data available
p) Auto-ignition temperature: Not flammable (USCG, 1999)
q) Decomposition temperature: No data available
r) Viscosity: No data available
s) Explosive properties: No data available
t) Oxidizing properties: No data available
9.2 Other information
Topological Polar Surface Area (TPSA): 88.6 Ų
Complexity: 62
10.1 Reactivity
No specific reactivity hazards identified under normal handling conditions.
10.2 Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
No hazardous reactions under normal conditions.
10.4 Conditions to avoid
Avoid heat, sparks, open flames, direct sunlight, and moisture.
Avoid strong oxidizing agents, strong acids, and strong bases.
10.5 Incompatible materials
Anhydrous copper sulfate causes hydroxylamine to ignite & the hydrated salt is vigorously reduced.
Solutions of sodium hypobromite are decomposed by powerful catalytic action of cupric ions, even as impurities. /Cupric salts/
10.6 Hazardous decomposition products
Thermal decomposition may produce: Carbon monoxide (CO), Carbon dioxide (CO₂), Sulfur oxides (SOx).
See also Section 5 (Fire-fighting measures) for combustion products.
11.1 Information on toxicological effects
Acute toxicity:
No acute toxicity data available.
Skin corrosion/irritation:
Causes severe skin burns and eye damage (H314).
Serious eye damage/eye irritation:
Causes serious eye damage (H318).
Respiratory or skin sensitization:
May cause an allergic skin reaction (H317).
Germ cell mutagenicity:
Suspected of causing genetic defects (H341).
Carcinogenicity:
No data available.
Reproductive toxicity:
Suspected of damaging fertility or the unborn child (H361).
Specific target organ toxicity (single exposure):
H370, H372, H373
Specific target organ toxicity (repeated exposure):
No data available.
Aspiration hazard:
No data available.
11.2 Additional information
Carcinogen classification:
No indication of carcinogenicity to humans (not listed by IARC).
Exposure routes:
The substance can be absorbed into the body by inhalation of its aerosol and by ingestion.
Oral (L277) ; inhalation (L277) ; dermal (L277)
Signs and symptoms of exposure:
Cough. Sore throat.
Redness. Pain.
Redness. Pain. Blurred vision.
Abdominal pain. Burning sensation. Nausea. Vomiting. Diarrhoea. Shock or collapse.
Breathing high levels of copper can cause irritation of the nose and throat. Ingesting high levels of copper can cause nausea, vomiting, diarrhea, headache, dizziness, and respiratory difficulty. (L278, L279)
Data source: Hazardous Substances Data Bank (HSDB) via PubChem.
12.1 Toxicity
LC50 Anguilla rostrata (American eel) 3.20 mg/l/96 hr. /Conditions of bioassay not specified/
LC50 Schistosoma mansoni (Miricidia) 8.5 mg/l per hr. /Conditions of bioassay not specified/
LC90 Schistosoma mansoni (Miricidia) 15.75 mg/l per hr. /Conditions of bioassay not specified/
LC50 Puntius conchonius 0.709 mg/l/48 hr in water hardness of 310 mg/l calcium carbonate. /Static bioassay/
For more Ecotoxicity Values (Complete) data for COPPER(II) SULFATE (17 total), please visit the HSDB record page.
The substance is very toxic to aquatic organisms. The substance may cause long-term effects in the aquatic environment. Bioaccumulation of this chemical may occur along the food chain, for example in fish. It is strongly advised not to let the chemical enter into the environment.
Occurs in nature as mineral hydrocyanite.
... Copper sulfate ... may originate from mining and ore crushing and beneficiation processes. Smelting operations may /also/ produce /copper/ sulfate ... .
Terrestrial Fate: In soil, copper sulfate is partly washed down to lower levels, partly bound by soil components, and partly oxidatively transformed.
... Granular copper sulfate /was applied/ to the surface of Hoover Reservoir, Franklin County, Ohio. Soluble and particulate cupric copper concn at several depths were measured by atomic absorption spectrophotometry for four days after application. The soluble cupric copper concn decreased to near baseline values in 2 to 6 hr when 0.2 or 0.4 g of copper sulfate pe
12.2 Persistence and degradability
No data available.
12.3 Bioaccumulative potential
No data available.
12.4 Mobility in soil
No data available.
12.5 Results of PBT and vPvB assessment
PBT/vPvB assessment not available.
12.6 Other adverse effects
This substance is classified as hazardous to the aquatic environment.
13.1 Waste treatment methods
Waste Treatment Methods: Waste material must be disposed of in accordance with national and local regulations. Leave chemicals in original containers and do not mix with other waste. Handle uncleaned containers in the same manner as the product itself.
14.1 UN number
Not regulated as dangerous goods (research quantities typically exempt).
14.2 UN proper shipping name
Not subject to transport regulations (small quantities for research use).
14.3 Transport hazard class(es)
Not classified as dangerous goods for transport (research quantities).
DOT label: Poison
14.4 Packing group
Not applicable (not regulated as dangerous goods in typical research quantities).
14.5 Environmental hazards
Marine pollutant: Yes (classified as environmentally hazardous per GHS).
14.6 Special precautions for user
Transport in original packaging. Ensure containers are tightly sealed.
For bulk or commercial quantities, consult applicable transport regulations (DOT, IATA, IMDG).
14.7 Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not applicable.
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
US EPA / TSCA: Subject to EPA TSCA regulations
EU ECHA / REACH: Registered (REACH Active)
SARA 302 Components:
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313 Components:
This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 Hazards:
Acute (short-term) health hazard
Chronic (long-term) health hazard
Environmental hazard
Massachusetts Right To Know Components:
This material contains components subject to the Massachusetts Right to Know Act. See Section 2 for hazard classification.
Pennsylvania Right To Know Components:
This material contains components subject to the Pennsylvania Right to Know Act. See Section 2 for hazard classification.
New Jersey Right To Know Components:
This material contains components subject to the New Jersey Right to Know Act. See Section 2 for hazard classification.
California Prop. 65 Components:
This product does not contain any chemicals known to the State of California to cause cancer, birth defects, or any other reproductive harm.
Other regulatory listings:
- The Australian Inventory of Industrial Chemicals: Chemical: Sulfuric acid, copper(2+) salt (1:1)
- EFSA Legal Basis: Commission Regulation No 844/2012
- New Jersey Worker and Community Right to Know Act: The New Jersey Worker and Community Right to Know Act requires public and private employers to provide information about hazardous substances at their workplaces. (N.J.S.A. 34:5A-1 et. seq.)
- Atmospheric Standards: Cupric sulfate is designated as a hazardous substance under section 311(b)(2)(A) of the Federal Water Pollution Control Act and further regulated by the Clean Water Act Amendments of 1977 and 1978. These regulations apply to discharges of this substance. This designation includes any isomers and hyd
- Federal Drinking Water Standards: EPA 1300 ug/l (Action Level) /Copper/
15.2 Chemical safety assessment
A chemical safety assessment has not been carried out for this substance.
For research-use-only compounds, no CSA is required under REACH Annex I.
Revision Date: 2026/09/08
Further Information: The information provided is believed to be correct but is not exhaustive and should be used only as a guideline based on current knowledge. It does not represent a guarantee of the properties of the product. Selleck Chemicals Corporation and its Affiliates shall not be held liable for any damage resulting from handling or contact with the product.