AMG319

Catalog No.S7813 Batch:S781301

Technical Data

Formula	C₂₁H₁₆FN₇
Molecular Weight	385.4	CAS No.	1608125-21-8
Solubility (25°C)*	In vitro	DMSO	77 mg/mL (199.79 mM)
		Ethanol	77 mg/mL (199.79 mM)
		Water	Insoluble
* <1 mg/ml means slightly soluble or insoluble. * Please note that Selleck tests the solubility of all compounds in-house, and the actual solubility may differ slightly from published values. This is normal and is due to slight batch-to-batch variations. * Room temperature shipping (Stability testing shows this product can be shipped without any cooling measures.)

Preparing Stock Solutions

Biological Activity

Description

AMG319 is a potent and selective PI3Kδ inhibitor with IC50 of 18 nM, >47-fold selectivity over other PI3Ks. Phase 2.

Targets

PI3Kδ ^[1]	PI3Kγ ^[1]
18 nM	850 nM

In vitro

AMG319 inhibits anti-IgM/CD40L-induced B cell proliferation with IC50 of 8.6 nM and reduces pAkt level with IC50 of 1.5 nM. AMG319 also inhibits anti-IgD-induce CD-69 expression in HWB. ^[1]

In vivo

In female Lewis rats, AMG319 (3 mg/kg, p.o.) inhibits the KLH-induced inflammatory response by 88%. In the transgenic (IgMm) mice, AMG319 (, p.o.) inhibits in vivo pAKT with IC50 of 1.9 nM. ^[1]

Protocol (from reference)

Kinase Assay:^{^[1]}	PI3K Enzyme Assays A PI3K Alphascreen assay is used to measure the activity of a panel of four phosphoinositide 3-kinases: PI3Kα, PI3Kβ, PI3Kγ, and PI3Kδ. Enzyme reaction buffer is prepared using sterile water and 50 mM Tris-HCl, pH 7, 14 mM MgCl₂, 2 mM sodium cholate, and 100 mM NaCl. 2 mM DTT is added fresh on the day of the experiment. The Alphascreen buffer is made using sterile water and 10 mM Tris-HCl, pH 7.5, 150 mM NaCl, 0.10% Tween 20, and 30 mM EDTA. Then 1 mM DTT is added fresh on the day of the experiment. Compound source plates used for this assay are 384-well Greiner clear polypropylene plates containing test compounds at 5 mM and diluted 1:2 over 22 concentrations. Columns 23 and 24 contained only DMSO, as these wells comprised the positive and negative controls, respectively. Source plates are replicated by transferring 0.5 μL per well into 384-well Optiplates. Each PI3K isoform is diluted in enzyme reaction buffer to 2× working stocks. PI3Kα is diluted to 1.6 nM, PI3Kβ is diluted to 0.8 nM, PI3Kγ is diluted to 15 nM, and PI3Kδ is diluted to 1.6 nM. PI(4,5)P2 is diluted to 10 μM, and ATP was diluted to 20 μM. This 2× stock is used in the assays for PI3Kα and PI3Kβ. For assay of PI3Kγ and PI3Kδ, PI(4,5)P2 is diluted to 10 μM and ATP was diluted to 8 μM to prepare a similar 2× working stock. Alphascreen reaction solutions are made using beads from the anti-GST Alphascreen kit. Two 4× working stocks of the Alphascreen reagents are made in Alphascreen reaction buffer. In one stock, biotinylated-IP4 is diluted to 40 nM and streptavadin-donor beads are diluted to 80 μg/mL. In the second stock, PIP3-binding protein is diluted to 40 nM and anti-GST-acceptor beads were diluted to 80 μg/mL. As a negative control, a reference inhibitor at a concentration ≫Ki (40 μM) is included in column 24 as a negative (100% inhibition) control. Using a 384-well Multidrop, 10 μL/well of 2× enzyme stock is added to columns 1–24 of the assay plates for each isoform. An amount of 10 μL/well of the appropriate substrate 2× stock (containing 20 μM ATP for the PI3Kα and -β assays and containing 8 μM ATP for the PI3Kγ and -δ assays) is then added to columns 1–24 of all plates. Plates are then incubated at room temperature for 20 min. In the dark, 10 μL/well of the donor bead solution is added to columns 1–24 of the plates to quench the enzyme reaction. The plates are incubated at room temperature for 30 min. Still in the dark, 10 μL/well of the acceptor bead solution is added to columns 1–24 of the plates. The plates are then incubated in the dark for 1.5 h. The plates are read on an Envision multimode plate reader using a 680 nm excitation filter and a 520–620 nm emission filter.
Animal Study:^{^[1]}	Animal Models Female Lewis rats Dosages ~3 mg/kg Administration p.o.

Kinase Assay:^{^[1]}

PI3K Enzyme Assays
A PI3K Alphascreen assay is used to measure the activity of a panel of four phosphoinositide 3-kinases: PI3Kα, PI3Kβ, PI3Kγ, and PI3Kδ. Enzyme reaction buffer is prepared using sterile water and 50 mM Tris-HCl, pH 7, 14 mM MgCl₂, 2 mM sodium cholate, and 100 mM NaCl. 2 mM DTT is added fresh on the day of the experiment. The Alphascreen buffer is made using sterile water and 10 mM Tris-HCl, pH 7.5, 150 mM NaCl, 0.10% Tween 20, and 30 mM EDTA. Then 1 mM DTT is added fresh on the day of the experiment. Compound source plates used for this assay are 384-well Greiner clear polypropylene plates containing test compounds at 5 mM and diluted 1:2 over 22 concentrations. Columns 23 and 24 contained only DMSO, as these wells comprised the positive and negative controls, respectively. Source plates are replicated by transferring 0.5 μL per well into 384-well Optiplates. Each PI3K isoform is diluted in enzyme reaction buffer to 2× working stocks. PI3Kα is diluted to 1.6 nM, PI3Kβ is diluted to 0.8 nM, PI3Kγ is diluted to 15 nM, and PI3Kδ is diluted to 1.6 nM. PI(4,5)P2 is diluted to 10 μM, and ATP was diluted to 20 μM. This 2× stock is used in the assays for PI3Kα and PI3Kβ. For assay of PI3Kγ and PI3Kδ, PI(4,5)P2 is diluted to 10 μM and ATP was diluted to 8 μM to prepare a similar 2× working stock. Alphascreen reaction solutions are made using beads from the anti-GST Alphascreen kit. Two 4× working stocks of the Alphascreen reagents are made in Alphascreen reaction buffer. In one stock, biotinylated-IP4 is diluted to 40 nM and streptavadin-donor beads are diluted to 80 μg/mL. In the second stock, PIP3-binding protein is diluted to 40 nM and anti-GST-acceptor beads were diluted to 80 μg/mL. As a negative control, a reference inhibitor at a concentration ≫Ki (40 μM) is included in column 24 as a negative (100% inhibition) control. Using a 384-well Multidrop, 10 μL/well of 2× enzyme stock is added to columns 1–24 of the assay plates for each isoform. An amount of 10 μL/well of the appropriate substrate 2× stock (containing 20 μM ATP for the PI3Kα and -β assays and containing 8 μM ATP for the PI3Kγ and -δ assays) is then added to columns 1–24 of all plates. Plates are then incubated at room temperature for 20 min. In the dark, 10 μL/well of the donor bead solution is added to columns 1–24 of the plates to quench the enzyme reaction. The plates are incubated at room temperature for 30 min. Still in the dark, 10 μL/well of the acceptor bead solution is added to columns 1–24 of the plates. The plates are then incubated in the dark for 1.5 h. The plates are read on an Envision multimode plate reader using a 680 nm excitation filter and a 520–620 nm emission filter.

Animal Study:^{^[1]}

Animal Models
Female Lewis rats
Dosages
~3 mg/kg
Administration
p.o.

References

[1] Cushing TD, et al. J Med Chem. 2015, 58(1), 480-511.

Selleck's AMG319 has been cited by 6 publications

Impaired airway epithelial barrier integrity was mediated by PI3Kδ in a mouse model of lipopolysaccharide-induced acute lung injury [ Int Immunopharmacol, 2021, 95:107570]	PubMed: 33773208
Distinct roles of PI3Kδ and PI3Kγ in a toluene diisocyanate-induced murine asthma model [ Toxicology, 2021, 454:152747]	PubMed: 33711354
Topical Application of the PI3Kβ-Selective Small Molecule Inhibitor TGX-221 Is an Effective Treatment Option for Experimental Epidermolysis Bullosa Acquisita [ Front Med (Lausanne), 2021, 8:713312]	PubMed: 34557502
Topical Application of the PI3Kβ-Selective Small Molecule Inhibitor TGX-221 Is an Effective Treatment Option for Experimental Epidermolysis Bullosa Acquisita [ Front Med (Lausanne), 2021, 8:713312]	PubMed: 34557502
In vivo microscopy reveals macrophage polarization locally promotes coherent microtubule dynamics in migrating cancer cells [ Nat Commun, 2020, 11(1):3521]	PubMed: 32665556
Screening of PI3K-Akt-targeting Drugs for Silkworm against Bombyx mori Nucleopolyhedrovirus. [ Molecules, 2019, 24(7)]	PubMed: 30939726

RETURN POLICY
Selleck Chemical’s Unconditional Return Policy ensures a smooth online shopping experience for our customers. If you are in any way unsatisfied with your purchase, you may return any item(s) within 7 days of receiving it. In the event of product quality issues, either protocol related or product related problems, you may return any item(s) within 365 days from the original purchase date. Please follow the instructions below when returning products.

SHIPPING AND STORAGE
Selleck products are transported at room temperature. If you receive the product at room temperature, please rest assured, the Selleck Quality Inspection Department has conducted experiments to verify that the normal temperature placement of one month will not affect the biological activity of powder products. After collecting, please store the product according to the requirements described in the datasheet. Most Selleck products are stable under the recommended conditions.

NOT FOR HUMAN, VETERINARY DIAGNOSTIC OR THERAPEUTIC USE.